No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, DAA, NAC, PPPoE, Policy Association, and IP session.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Monitoring NAC Operation

Monitoring NAC Operation

Context

In routine maintenance, you can run the following commands in any view to check whether NAC is functioning properly.

Procedure

  • Run the display access-user command to view information about NAC access users.
  • Run the display dot1x command to view information about 802.1X authentication.
  • Run the display mac-authen command to view information about MAC address authentication.
  • Run the display portal command to view information about Portal authentication.
  • Run the display server-detect state command to view the status of a Portal server.
  • Run the display mac-address authen command to view MAC address entries of the authen type in the system.
  • Run the display mac-address pre-authen command to view MAC address entries of the Pre-authen type in the system.
  • Run the display ucl-group all command to view information about all UCL groups that are created.
  • Run the display ucl-group ip command to view information about static UCL groups.
  • Run the display aaa statistics access-type-authenreq command to verify the number of authentication requests.
Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178117

Views: 119980

Downloads: 55

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next