No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R011C10 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, DAA, NAC, PPPoE, Policy Association, and IP session.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the MAC Address Authentication Configuration

Verifying the MAC Address Authentication Configuration


You can run the commands to check the configured parameters after completing the MAC address authentication configuration.


  • Run the display mac-authen [ interface { interface-type interface-number1 [ to interface-number2 ] } &<1-10> ] command to check the configuration of MAC address authentication.
  • Run the display mac-address authen [ interface-type interface-number | vlan vlan-id ] * [ verbose ] command to check the current authen MAC address entries in the system.
  • Run the display user-group [ group-name ] command to check the user group configuration.
  • Run the display access-user command to check information about online NAC users.
  • Run the display aaa statistics access-type-authenreq command to verify the number of authentication requests.
  • Run the display mac-authen quiet-user { all | mac-address mac-address } command to view information about MAC address authentication users who are quieted.
  • Run the display mac-address pre-authen [ interface-type interface-number | vlan vlan-id ] * [ verbose ] command to view the current pre-authen MAC address entries in the system.
Updated: 2019-10-21

Document ID: EDOC1000178117

Views: 124486

Downloads: 59

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next