Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Examples for NAC
- Example for Configuring MAC Address Authentication (AAA RADIUS
Authentication Is Used)
- Example for Configuring MAC Address Authentication (AAA Local
Authentication Is Used)
- Example for Configuring MAC Address Authentication with Double
VLAN Tags in the L2 BNG Scenario (AAA RADIUS Authentication Is Used)
- Example for Configuring 802.1X Authentication (Authentication
Point on the Access Switch)
- Example for Configuring 802.1X Authentication (Authentication
Point on the Aggregation Switch)
- Example for Configuring Portal Authentication (Using the Portal
Protocol)
- Example for Configuring Portal Authentication (Using the HTTPS Protocol)
- Example for Configuring Terminal Type Identification in 802.1X
+ RADIUS Authentication
- Example for Configuring MAC Address Migration
- Example for Connecting IP Phones to Switches Through MAC Address
Authentication Triggered by LLDP or CDP Packets
Previous
