No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, DAA, NAC, PPPoE, Policy Association, and IP session.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuration Procedure for NAC

Configuration Procedure for NAC

Pre-configuration Tasks

NAC only provides multiple network access control protocols for users. To completely authenticate user identity and control users' network access rights, complete the following AAA configuration tasks before configuring NAC:

  • Configure the domain and AAA scheme.
  • Configure the user name and password on the RADIUS or HWTACACS server if RADIUS or HWTACACS authentication is used.
  • Configure the user name and password on the network access device if local authentication is used.

For details about how to configure the AAA client, see AAA Configuration.

Configuration Procedure

Figure 4-13  NAC Configuration Procedure

NAC Configuration Tasks

Authentication Mode

Scenario

Task

802.1X authentication

Users are densely distributed and high information security is required.

MAC Address authentication

Dumb terminals such as printers and fax machines need to connect to the network.

Portal authentication

Users are sparsely distributed and move frequently.

Multi-mode authentication

The device allows multiple authentication modes to be deployed simultaneously to meet various authentication requirements on the network.

To configure multi-mode authentication of several authentication modes, you only need to bind corresponding access profiles to an authentication profile. The device triggers the corresponding authentication based on received authentication packets.

Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178117

Views: 119103

Downloads: 55

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next