No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, DAA, NAC, PPPoE, Policy Association, and IP session.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the DHCP User Name and Password

(Optional) Configuring the DHCP User Name and Password

Context

The DHCP user name and password must be configured during server authentication.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run dhcp user-name format-include { ip-address | mac-address | option82 | sysname } *

    The DHCP user name format and the sequence of elements in the user name are specified.

    By default, the DHCP user name is in the following format: system name + "-" + slot ID (two digits, prefixed 0 if it contains only one digit) + subcard ID (one digit, set to 0 if the subcard does not exist) + port number (two digits, prefixed 0 if it contains only one digit) + outer VLAN ID (four digits, prefixed 0 if it contains fewer than four digits) + inner VLAN ID (five digits, prefixed 0 if it contains fewer than five digits) + @ + access domain name, for example, HUAWEI-02024000000768@domain1.

    If the user name is generated according to the Option 82 field and the user name contains non-ASCII characters, the non-ASCII characters are displayed as "..." for example, ...session1@domain1.

  3. Run dhcp user-password cipher password

    The DHCP user password is set.

    By default, the DHCP user password is vlan.

    NOTE:

    To ensure device security, change the password periodically.

Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178117

Views: 119440

Downloads: 55

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next