No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, DAA, NAC, PPPoE, Policy Association, and IP session.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Enabling URL Encoding and Decoding

(Optional) Enabling URL Encoding and Decoding

Context

To improve web application security, data from untrustworthy sources must be encoded before being sent to clients. URL encoding is most commonly used in web applications. After URL encoding and decoding are enabled, some special characters in redirected URLs are converted to secure formats, preventing clients from mistaking them for syntax signs or instructions and unexpectedly modifying the original syntax. In this way, cross-site scripting attacks and injection attacks are prevented.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run portal url-encode enable

    URL encoding and decoding are enabled.

    By default, URL encoding and decoding are enabled.

    NOTE:

    If the system software is upgraded from a version earlier than V200R009C00SPC500 to V200R009C00SPC500 or a later version, the switch automatically runs the undo portal url-encode enable command to disable URL encoding and decoding.

Check the Configuration

Run the display portal url-encode configuration command to check the configuration of URL encoding and decoding.

Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178117

Views: 117855

Downloads: 55

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next