No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R011C10 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, DAA, NAC, PPPoE, Policy Association, and IP session.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing NAC Statistics

Clearing NAC Statistics


Cleared statistics cannot be restored. Exercise caution when you run the following commands.


  • Run the reset dot1x statistics command in the user view to clear statistics about 802.1X authentication.
  • Run the reset mac-authen statistics command in the user view to clear statistics about MAC address authentication.
  • Run the reset access-user traffic-statistics command in the user view to clear user traffic statistics.
  • Run the reset aaa statistics access-type-authenreq command in any view to clear the number of authentication requests.
  • Run the reset access-user dot1x-identity statistics command in the system view to clear statistics about Identity packets for wireless 802.1X authentication on a switch.
Updated: 2019-10-21

Document ID: EDOC1000178117

Views: 131081

Downloads: 62

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next