No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R011C10 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, DAA, NAC, PPPoE, Policy Association, and IP session.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Why an 802.1X User Still Fails MAC Address Bypass Authentication After an Authentication Failure?

Why an 802.1X User Still Fails MAC Address Bypass Authentication After an Authentication Failure?

After MAC address bypass authentication is enabled, the device performs MAC address bypass authentication on the user who fails 802.1X authentication. In this case, the access device actually starts the MAC address authentication process for the user, and the user name is determined by the mac-authen username command. To ensure that the user can pass MAC address bypass authentication, configure a MAC address authentication account for the user on the authentication server, and ensure that the account name format is the same as that configured in the mac-authen username command.

Updated: 2019-10-21

Document ID: EDOC1000178117

Views: 123856

Downloads: 59

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next