No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, DAA, NAC, PPPoE, Policy Association, and IP session.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Enabling System Log Suppression

(Optional) Enabling System Log Suppression

Context

When a user fails in authentication or goes offline, the device records a system log. The system log contains the MAC addresses of access device and access user and the authentication time.

If a user repeatedly attempts to go online after authentication failures or frequently goes online and offline in a short period, a lot of system logs are generated, which waste system resources and degrade system performance. System log suppression can address this problem. After the device generates a system log, it will not generate the same log within the suppression period.

NOTE:

The same system logs refer to the system logs containing the same MAC addresses. For example, after the device generates a system log for a user failing in authentication, the device will not generate new system log for this user in the suppression period if the user fails in authentication again. The system logs for users logging offline are generated in the same way.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run access-user syslog-restrain enable

    The system log suppression is enabled.

    By default, system log suppression is enabled.

  3. Run access-user syslog-restrain period period

    A period for system log suppression is set.

    By default, the period of system log suppression is 300s.

Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178117

Views: 117637

Downloads: 55

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next