No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R011C10 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, DAA, NAC, PPPoE, Policy Association, and IP session.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Authentication Profile Configuration

Verifying the Authentication Profile Configuration


After configuring an authentication profile, run the following commands to verify the configuration.


  • Run the display authentication-profile configuration [ name authentication-profile-name ] command to check the configuration of the authentication profile.
  • Run the display free-rule-template configuration [ name free-rule-name ] command to check the configuration of the authentication-free rule profile.
  • Run the display free-rule command to check whether an authentication-free rule defined by ACL is delivered.
Updated: 2019-10-21

Document ID: EDOC1000178117

Views: 118976

Downloads: 55

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next