No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, DAA, NAC, PPPoE, Policy Association, and IP session.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Policy Association Configuration

Verifying the Policy Association Configuration

Context

You can run the following commands to check the configurations on access devices and control devices.

Procedure

  • Run the display associate-user command to check the user association information on the device.

    This command applies to access devices and control devices.

  • Run the display access-user as-name as-name command to view information about online users on a specified access device.

    This command applies to only control devices.

    The actual name of an access device may differ from the name displayed on the control device (using the display as all command). When an access device goes online, its name is processed as follows:
    • If the access device uses the default name, its name is changed to default name-MAC address of the access device on the control device.
    • If the access device name contains spaces or double quotation masks ("), the spaces are changed to en dashes (-) and the double quotation masks (") are changed to single quotation masks (') on the control device.

  • Run the display authentication interface interface-type interface-number command to view whether the remote access control function is enabled on the access device's interface.

    This command displays output only on access devices.

  • Run the display associate-user statistics [ interface interface-type interface-number ] command to view statistics about associated users on the access device's interface.

    This command applies only to access devices.

  • Run the display authentication associate command to view global configurations of associated users.

    This command applies only to access devices.

  • Run the display authentication associate alarm-restrain-table { all | interface interface-type interface-number } command to view suppression table information of alarms that are generated due to excess associated users.

    This command applies only to access devices.

Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178117

Views: 118848

Downloads: 55

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next