Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document.
Note: Even the most advanced machine translation cannot match the quality of professional translators.
Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Setting the Maximum Number of Concurrent Access Users for 802.1X Authentication on an Interface
Context
The administrator can set the maximum number of concurrent access users for 802.1X authentication on the interface. When the number of access users reaches the maximum number allowed, new users for 802.1X authentication cannot access networks
through the interface.![]()
NOTE:
NOTE: - If the number of current online users on an interface has exceeded the maximum number, online users are not affected but new access users are limited.
- This function is effective only when the MAC address-based access mode is configured on the interface. When the interface-based access mode is configured on the interface, the maximum number of concurrent access users on the interface is automatically set to 1. In this case, after one user is authenticated on the interface, other users can go online without being authenticated.
Procedure
- Run system-view
The system view is displayed.
- Set the maximum number of concurrent access users on an interface in the system or interface view.
- In the system view:
- In the interface view:
By default, the number of 802.1X authentication users is the maximum number of 802.1X authentication users supported by the device.
Previous
