No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R011C10 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, DAA, NAC, PPPoE, Policy Association, and IP session.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Detection Function for Portal Authentication

(Optional) Configuring the Detection Function for Portal Authentication


In practical networking applications of Portal authentication, if communication is interrupted due to a network failure between the device and the Portal server or because the Portal server fails, new Portal authentication users cannot go online, and online Portal users cannot go offline normally.

With the Portal authentication detection function, even if the network fails or the Portal server cannot work properly, the device still allows the user to use the network and have certain network access rights. The device reports failures using logs and traps.


  1. Run system-view

    The system view is displayed.

  2. Run web-auth-server server-name

    The Portal server template view is displayed.

  3. Run server-detect [ interval interval-period | max-times times | critical-num critical-num | action { log | trap | permit-all } * ] *

    The detection function of the Portal server is enabled.

    By default, the detection function of the Portal server is disabled.

Updated: 2019-10-21

Document ID: EDOC1000178117

Views: 119159

Downloads: 55

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next