No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, DAA, NAC, PPPoE, Policy Association, and IP session.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the User Logout Delay Function When an Interface Link Is Faulty

(Optional) Configuring the User Logout Delay Function When an Interface Link Is Faulty

Context

If a link is faulty, the interface is interrupted and users are directly logged out. To solve this problem, you can configure the user logout delay function. When the interface link is faulty, the users remain online within the delay. In this case, if the link is restored, the users do not need to be re-authenticated. If the users are disconnected after the delay and the link is restored, the users need to be re-authenticated.

NOTE:
  • This function takes effect only for wired users who go online on Layer 2 physical interfaces that have been configured with NAC authentication.

  • To make the function take effect, it is recommended that the configured interval be greater than the time during which the interface is in Up state.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run authentication-profile name authentication-profile-name

    The authentication profile view is displayed.

  3. Run link-down offline delay { delay-value | unlimited }

    The user logout delay is configured when an interface link is faulty.

    The default user logout delay is 10 seconds when an interface link is faulty.

    If the delay is 0, users are logged out immediately when the interface link is faulty. If the delay is unlimited, users are not logged out when the interface link is faulty.

Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178117

Views: 123091

Downloads: 58

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next