No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, DAA, NAC, PPPoE, Policy Association, and IP session.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the PPPoE Server Configuration

Verifying the PPPoE Server Configuration

Pre-configuration Tasks

After the PPPoE server is configured, dial the PPPoE server from the PPPoE client. When the connection is successfully set up, check the PPPoE session status.

Procedure

  • Run the display pppoe item index command to view PPPoE negotiation information of online PPPoE users.
  • Run the display ppp item index command to view PPP negotiation information of online PPPoE users.
  • Run the display ppp item lcp index command to view LCP negotiation information of online PPPoE users.
  • Run the display ppp item ipcp index command to view NCP negotiation information of online PPPoE users.
  • Run the display ppp chasten command to view information about the currently silent PPPoE users.
Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178117

Views: 118427

Downloads: 55

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next