No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R011C10 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, DAA, NAC, PPPoE, Policy Association, and IP session.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Clearing AAA Statistics

Clearing AAA Statistics


The AAA statistics cannot be restored after being cleared. Clear AAA statistics with caution.

Run the following commands to clear the statistics.


  • Run the reset aaa { abnormal-offline-record | offline-record | online-fail-record } command in the system view to clear records of abnormal logout, logout, and login failures.
  • Run the reset aaa statistics offline-reason command in any view to clear the statistics on reasons why users go offline.
  • Run the reset access-user statistics command in any view to clear the statistics on access user authentication.
  • Run the reset hwtacacs-server statistics { accounting | all | authentication | authorization } command in the user view to clear the statistics on HWTACACS authentication, accounting, and authorization.
  • Run the reset hwtacacs-server accounting-stop-packet { all | ip ip-address } command in the user view to clear the statistics on HWTACACS accounting-stop packets.
  • Run the reset radius-server accounting-stop-packet { all | ip { ipv4-address | ipv6-address } } command to clear remaining buffer information on RADIUS accounting-stop packets.
  • Run the reset local-user [ user-name ] password history record command in the AAA view to clear historical passwords of local users.
  • Run the reset aaa statistics access-type-authenreq command in any view to clear the number of authentication requests.
Updated: 2019-10-21

Document ID: EDOC1000178117

Views: 120022

Downloads: 55

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next