No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R011C10 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, DAA, NAC, PPPoE, Policy Association, and IP session.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Creating an Authentication Profile

Creating an Authentication Profile


NAC implements access control on users. To facilitate NAC function configuration, the device uses authentication profiles to uniformly manage NAC configuration. You can configure parameters in an authentication profile to provide different access control modes for users. For example, you can configure the access profile bound to the authentication profile to determine the authentication mode for the authentication profile. The device then uses the authentication mode to authenticate users on the interface or VAP profile to which the authentication profile is applied.


  1. Run system-view

    The system view is displayed.

  2. Run authentication-profile name authentication-profile-name

    An authentication profile is created and the authentication profile view is displayed.

    By default, the device has six built-in authentication profiles: default_authen_profile, dot1x_authen_profile, mac_authen_profile, portal_authen_profile, dot1xmac_authen_profile, and multi_authen_profile.

    • The built-in authentication profile default_authen_profile and the compatibility profile converted after an upgrade are not counted in the configuration specification. The six built-in authentication profiles (default_authen_profile, dot1x_authen_profile, mac_authen_profile, portal_authen_profile, dot1xmac_authen_profile, and multi_authen_profile) can be modified and applied, but cannot be deleted.
    • Before deleting an authentication profile, ensure that this profile is not bound to any interface or VAP profile. You can run the display authentication-profile configuration command to check whether the authentication profile is bound to an interface or VAP profile

Updated: 2019-10-21

Document ID: EDOC1000178117

Views: 119065

Downloads: 55

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next