No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R011C10 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, DAA, NAC, PPPoE, Policy Association, and IP session.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the DAA Configuration

Verifying the DAA Configuration


After DAA configurations are complete, you can check the configuration result.


  • Run the display traffic-group { all | name group-name } command to view information about traffic group.
  • Run the display traffic-group state command to view traffic group status on each LPU.
  • Run the display domain [ name domain-name ] command to view the QoS profile bound to each tariff level and check whether the accounting function is enabled for each tariff level.
Updated: 2019-10-21

Document ID: EDOC1000178117

Views: 117595

Downloads: 55

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next