No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, DAA, NAC, PPPoE, Policy Association, and IP session.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Configuring the Quiet Function for MAC Address Authentication

(Optional) Configuring the Quiet Function for MAC Address Authentication

Context

The quiet function for MAC address authentication is enabled on a device by default. When the maximum number of authentication failures exceeds 10, the device quiets a MAC authentication user and does not process authentication requests from the user, reducing impact on the system caused by attackers.

NOTE:

For MAC address authentication users, the quiet function takes effect only when the users are not added to user entries. In the common mode, no user entry is generated when a MAC address authentication user fails the authentication. In this case, the quiet function takes effect and a quiet entry is generated. If the network access rights for user pre-connections or authentication failures are configured, the authorized user enters the pre-connection state, a user entry is generated, and the quiet function does not take effect.

When the number of quiet entries reaches the maximum number, the device does not allow new users who are not in the quiet table to access the network.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run mac-authen quiet-times fail-times

    The maximum number of authentication failures within 60 seconds before the device quiets the MAC authentication user is configured.

    By default, the maximum number of authentication failures is 10.

Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178117

Views: 123005

Downloads: 58

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next