No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R011C10 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, DAA, NAC, PPPoE, Policy Association, and IP session.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
(Optional) Setting the NAS Interface Type

(Optional) Setting the NAS Interface Type


During AAA authentication, you can set the NAS interface type on a sub-interface. When a user is being authenticated, the NAS interface type encapsulated in the RADIUS attribute is reported.


  1. Run system-view

    The system view is displayed.

  2. Run interface interface-type interface-number.subnumber

    The sub-interface view is displayed.

  3. Run dhcp nas-port-type { 802.11 | adsl-cap | adsl-dmt | async | cable | ethernet | g.3-fax | hdlc | idsl | isdn-async-v110 | isdn-async-v120 | isdn-sync | piafs | sdsl | sync | virtual | wireless-other | x.25 | x.75 | xdsl }

    The NAS interface type is set.

    By default, the NAS interface type is ethernet.

Updated: 2019-10-21

Document ID: EDOC1000178117

Views: 118934

Downloads: 55

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Previous Next