No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R011C10 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, DAA, NAC, PPPoE, Policy Association, and IP session.

Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Bandwidth Share Mode

Configuring the Bandwidth Share Mode


On a home network, all family members go online using the same account. To improve service experience of family members, you can configure the bandwidth share mode so that all members can share the bandwidth.


  1. Run system-view

    The system view is displayed.

  2. (Optional) Enter a domain view.
    1. Run aaa

      The AAA view is displayed.

    2. Run domain domain-name

      A domain is displayed.

  3. Run band-width share-mode

    The bandwidth share mode is enabled.

    By default, the bandwidth share mode is disabled.

    • This function does not apply to users who are connected through the inter-card Eth-Trunk interface.

    • If this command is run in the system view, it takes effect for all new online users who connected to the device. If this command is run in the AAA domain view, it takes effect only for new online users in the domain.
    • If the local or remote RADIUS server does not assign CAR settings to the users who will go online and the online users, the share mode is invalid to the users.

    • If the bandwidth share mode is enabled and different users use the same account for authentication, the users going online with no CAR settings assigned will not be affected when CAR settings are assigned to the users who go online later.

Updated: 2019-10-21

Document ID: EDOC1000178117

Views: 131307

Downloads: 62

Average rating:
This Document Applies to these Products

Related Version

Related Documents

Previous Next