No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R011C10 Configuration Guide - User Access and Authentication

This document describes the working mechanisms, configuration procedures, and configuration examples of User Access and Authentication features, such as AAA, DAA, NAC, PPPoE, Policy Association, and IP session.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring an IP Session

Configuring an IP Session

Pre-configuration Tasks

Before configuring an IP session, complete the following tasks:

  • Set physical parameters of a sub-interface.
  • To enable users to go online successfully, you must configure a static route between the egress gateway and DHCP server on the device.

Creating a VPN instance before binding an interface to the VPN instance

Configuration Procedure

You must enable the IP session function before performing the following configurations: bind a user authentication domain to an interface, configure the DHCP user name and password, configure the processing of option fields, configure ARP probe parameters, set the NAS interface type, and bind an interface to a VPN instance. The preceding configurations can be performed in any sequence.

Updated: 2019-10-21

Document ID: EDOC1000178117

Views: 118324

Downloads: 55

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next