No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 Configuration Guide - VPN

This document describes the VPN configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
L2VPN Access to L3VPN Supported by the Switch

L2VPN Access to L3VPN Supported by the Switch

VLL Access to the Public Network or L3VPN

A Virtual Leased Line (VLL) provides MPLS-based L2VPN services and transparently transmits Layer 2 data over the MPLS network. From the perspective of users, the MPLS access network is a Layer 2 switching network that establishes a Layer 2 connection between users and the carrier network. Users can access the public network or the L3VPN on bearer network of carriers through VLL.

VPLS Access to the Public Network or L3VPN

The Virtual Private LAN Service (VPLS) connects multiple Ethernet sites through the Packet Switch Network (PSN) to make them work as one LAN.

Unlike the point-to-point service of L2VPN, VPLS can be used to connect multiple Ethernet sites of a user to the L3VPN on the bearer network or to the public network through the MPLS access network.

Translation
Download
Updated: 2019-04-01

Document ID: EDOC1000178118

Views: 165675

Downloads: 169

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next