No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 Configuration Guide - VPN

This document describes the VPN configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Displaying BGP/MPLS IP VPN Information

Displaying BGP/MPLS IP VPN Information

Context

In routine maintenance, you can run the following commands in any view to check the status of BGP/MPLS IP VPN.

Procedure

  • Run the display ip vpn-instance [ verbose ] [ vpn-instance-name ] command to check information about the VPN instance.
  • Run the display default-parameter l3vpn command to check the default configuration of L3VPN during initialization.
  • Run the display ip routing-table vpn-instance vpn-instance-name command to check the IP routing table of a VPN instance.
  • Run the display bgp vpnv4 { all | vpn-instance vpn-instance-name } routing-table [ statistics ] label command to check information about labeled routes in the BGP routing table.
  • Run the display bgp vpnv4 { all | route-distinguisher route-distinguisher | vpn-instance vpn-instance-name } routing-table ipv4-address [ mask | mask-length ] command to check information about the BGP VPNv4 routing table.
  • Run the display bgp vpnv4 { all | route-distinguisher route-distinguisher | vpn-instance vpn-instance-name } routing-table statistics command to check statistics about the BGP VPNv4 routing table.
  • Run the display bgp vpnv4 { all | route-distinguisher route-distinguisher | vpn-instance vpn-instance-name } routing-table command to check information about the BGP VPNv4 routing table.
  • Run the display bgp vpnv4 { all | vpn-instance vpn-instance-name } group [ group-name ] command to check information about the BGP VPNv4 peer group.
  • Run the display bgp vpnv4 { all | vpn-instance vpn-instance-name } peer [ [ ipv4-address ] verbose ] command to check BGP VPNv4 peer information.
  • Run the display bgp vpnv4 { all | vpn-instance vpn-instance-name } network command to check the routing information advertised by BGP VPNv4.
  • Run the display bgp vpnv4 { all | vpn-instance vpn-instance-name } paths [ as-regular-expression ] command to check the AS path information of BGP VPNv4.
  • Run the display bgp vpnv4 vpn-instance vpn-instance-name peer { group-name | ipv4-address } log-info command to check the BGP peer's log information of a specified VPN instance.
  • Run the display mpls label-stack vpn-instance vpn-instance-name ip-address command to check the information about L3VPN label stacks.
Translation
Download
Updated: 2019-04-01

Document ID: EDOC1000178118

Views: 165858

Downloads: 169

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next