No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 Configuration Guide - VPN

This document describes the VPN configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring the Binding Relationships for the mVSI

Configuring the Binding Relationships for the mVSI

Context

Do as follows on the UPE.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run vsi vsi-name

    The view of the created VSI is displayed.

  3. Run track admin-vsi vsi-name

    The service VSI is bound to an mVSI.

    The mVSI can be bound to the service VSI. When receiving a gratuitous ARP packet or BFD Down packets, the mVSI requests all the bound service VSIs to clear the MAC address entries and to learn the MAC addresses again.

    NOTE:

    The control plane requests the forwarding plane to clear the MAC addresses of the service VSIs if the number of service VSIs bound to the mVSI reaches the threshold.

    • To clear the MAC address entries and learn the MAC addresses again, run the arp over-vpls enable.
    • If the number of service VSIs bound to the mVSI does not reach the threshold, the control plane delivers notification messages one by one to the forwarding plane to clear the MAC addresses of the service VSIs bound to the mVSI and records the events in the logs.
    • If the number of service VSIs bound to the mVSI reaches the threshold, the control plane delivers notification messages to the forwarding plane to clear the MAC addresses of all the service VSIs and records the log.

Translation
Download
Updated: 2019-04-01

Document ID: EDOC1000178118

Views: 158891

Downloads: 159

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next