No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 Configuration Guide - VPN

This document describes the VPN configuration procedures and provides configuration examples.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Default Settings for BGP/MPLS IPv6 VPN

Default Settings for BGP/MPLS IPv6 VPN

Table 4-2 lists the default settings for BGP/MPLS IPv6 VPN.

Table 4-2  Default settings for BGP/MPLS IPv6 VPN

Parameter

Default Setting

BGP/MPLS IPv6 VPN feature

Disabled

Alarm function for BGP/MPLS IPv6 VPN events

Disabled

Number of local AS number repetitions (applicable to Hub and Spoke networking)

0

Label allocation mode on PE devices

Label per instance

Translation
Download
Updated: 2019-04-01

Document ID: EDOC1000178118

Views: 158315

Downloads: 159

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next