No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R011C10 Configuration Guide - VPN

This document describes the VPN configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for L2VPN Access to L3VPN

Licensing Requirements and Limitations for L2VPN Access to L3VPN

Involved Network Elements

Other network elements are required to support L2VPN access to L3VPN.

License Requirements

L2VPN access to L3VPN can be used only after MPLS is enabled. MPLS functions of the switch are controlled by the license. By default, MPLS functions are disabled on a newly purchased switch. To use MPLS, apply for and purchase the license from the equipment supplier.

Version Requirements

Table 8-1  Products and versions supporting L2VPN access to L3VPN


Product Model

Minimum Version Required


S12708 and S12712






To know details about software mappings, see Hardware Query Tool.

Feature Limitations

For S12700 series switches, only X series cards support L2VPN access to L3VPN.

Updated: 2019-04-01

Document ID: EDOC1000178118

Views: 159561

Downloads: 159

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next