No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search


To have a better experience, please upgrade your IE browser.


S12700 V200R011C10 Configuration Guide - VPN

This document describes the VPN configuration procedures and provides configuration examples.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring VSI-based Traffic Suppression

Configuring VSI-based Traffic Suppression


On a VPLS network, you can limit the rates of broadcast, multicast, and unknown unicast packets to:

  • Enhance traffic management and appropriately allocate user bandwidth.
  • Prevent traffic attacks and enhance network security.

Do as follows on the PEs on which the VSI broadcast traffic, multicast traffic, and unknown unicast traffic need to be suppressed.


  1. Run system-view

    The system view is displayed.

  2. Run vsi vsi-name

    The VSI view is displayed.

  3. Run broadcast-suppression cir cir-value cbs cbs-value

    The broadcast traffic is suppressed based on VSIs.

  4. Run multicast-suppression cir cir-value cbs cbs-value

    The multicast traffic is suppressed based on VSIs.

  5. Run unknown-unicast-suppression cir cir-value cbs cbs-value

    The unknown unicast traffic is suppressed based on VSIs.

Updated: 2019-04-01

Document ID: EDOC1000178118

Views: 157920

Downloads: 157

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Previous Next