No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 Configuration Guide - VPN

This document describes the VPN configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Resetting BGP Connections

Resetting BGP Connections

Context

IPv6 VPN services are interrupted after the BGP connection is reset. So, confirm the action before you use the command.

When the BGP configuration changes, you can use the soft reset or reset BGP connections to let the new configurations take effect. Soft reset requires the BGP peers have route refreshment capability (supporting Route-Refresh messages).

Procedure

  • Run the refresh bgp vpn-instance vpn-instance-name ipv6-family { all | group group-name | internal | external } import command in the user view to trigger the inbound soft reset of VPN instance IPv6 address family's BGP connection.
  • Run the refresh bgp vpn-instance vpn-instance-name ipv6-family { all | group group-name | internal | external } export command in the user view to trigger the outbound soft reset of VPN instance IPv6 address family's BGP connection.
  • Run the refresh bgp vpnv6 { all | ipv4-address | ipv6-address | group group-name | internal | external } import command in the user view to trigger the inbound soft reset of BGP VPNv6 connection.
  • Run the refresh bgp vpnv6 { all | ipv4-address | ipv6-address | group group-name | internal | external } export command in the user view to trigger the outbound soft reset of BGP VPNv6 connection.
  • Run the reset bgp vpn-instance vpn-instance-name ipv6-family { all | as-number | ipv6-address | group group-name | external } command in the user view to reset BGP connections of the VPN instance IPv6 address family.
  • Run the reset bgp vpnv6 { as-number | ipv4-address | group group-name | all | internal | external } command in the user view to reset BGP VPNv6 connections.
Translation
Download
Updated: 2019-04-01

Document ID: EDOC1000178118

Views: 165586

Downloads: 169

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next