No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 Configuration Guide - VPN

This document describes the VPN configuration procedures and provides configuration examples.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Licensing Requirements and Limitations for BGP/MPLS IPv6 VPN

Licensing Requirements and Limitations for BGP/MPLS IPv6 VPN

Involved Network Elements

Other network elements are not required.

License Requirements

You can use the BGP/MPLS IPv6 VPN feature only after the MPLS function is enabled. The MPLS function is controlled by a license. By default, MPLS is disabled on a new device. To use the MPLS function, apply for and purchase the license from the equipment supplier. You can use the IPv6 MCE function independently without the need to enable MPLS, and IPv6 MCE is not under license control.

Version Requirements

Table 4-1  Products and versions supporting BGP/MPLS IPv6 VPN

Product

Product Model

Software Version

S12700

S12708, S12712

V200R005C00, V200R006C00, V200R007C00, V200R007C20, V200R008C00, V200R009C00, V200R010C00, V200R011C10

S12710

V200R010C00, V200R011C10

S12704

V200R008C00, V200R009C00, V200R010C00, V200R011C10

NOTE:
To know details about software mappings, see Hardware Query Tool.

Feature Limitations

  • The SA series cards do not support BGP/MPLS IPv6 VPN, and only support the IPv6 MCE.
  • In V200R005, the X1E series cards do not support BGP/MPLS IPv6 VPN, and only support the IPv6 MCE.

    In V200R006 and V200R007C00, the X1E series cards support BGP/MPLS IPv6 VPN but not HVPN or inter-AS VPN Option B.

    In V200R008, the X1E series cards support BGP/MPLS IPv6 VPN but not HVPN.

  • In V200R005, the XGE interface connected to ACU2, ET1D2IPS0S00, ET1D2FW00S00, ET1D2FW00S01, or ET1D2FW00S02 board does not support the BGP/MPLS IPv6 VPN, and only supports the IPv6 MCE.

  • The switches do not support binding between BGP/MPLS IPv6 VPN and TE tunnels.
Translation
Download
Updated: 2019-04-01

Document ID: EDOC1000178118

Views: 157806

Downloads: 157

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next