No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 Configuration Guide - VPN

This document describes the VPN configuration procedures and provides configuration examples.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Configuration of CE Dual-Homed Kompella VPLS

Verifying the Configuration of CE Dual-Homed Kompella VPLS

Prerequisites

All CE dual-homed Kompella VPLS configurations are complete.

Procedure

  • Run the display bgp vpls group [ group-name ] command to check the BGP VPLS peer group relationship on a PE or an ASBR PE.
  • Run the display bgp vpls peer [ [ ipv4-address ] verbose ] command to check the BGP VPLS peer relationship on a PE or an ASBR PE.
  • Run the display bgp vpls all command to check BGP VPLS label blocks on a PE or an ASBR PE.
  • Run the display vpls connection [ bgp | vsi vsi-name ] [ down | up ] [ verbose ] command to check the VPLS connection on a PE.
Translation
Download
Updated: 2019-04-01

Document ID: EDOC1000178118

Views: 157504

Downloads: 157

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next