No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 Configuration Guide - VPN

This document describes the VPN configuration procedures and provides configuration examples.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Verifying the Hub and Spoke Configuration

Verifying the Hub and Spoke Configuration

Prerequisites

The configurations of the Hub and Spoke function are complete.

Procedure

  • Run the display ip routing-table vpn-instance vpn-instance-name command to check routing information about the VPN-in and VPN-out on the Hub-PE.

    If the VPN-in routing table has routes to all the Spoke stations, and the VPN-out routing table has routes to the Hub and all the Spoke stations, it means the configuration is successful.

  • Run the display ip routing-table command to check routing information on the Hub-CE and all the Spoke-CE devices.

    The Hub-CE and all the Spoke-CE devices have routes to the Hub and all the Spoke sites.

Translation
Download
Updated: 2019-04-01

Document ID: EDOC1000178118

Views: 157600

Downloads: 157

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next