No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 Configuration Guide - VPN

This document describes the VPN configuration procedures and provides configuration examples.
Rate and give feedback :
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Associating the L2VE Interface with a VLL

Associating the L2VE Interface with a VLL

Context

Perform the following steps on an NPE.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run mpls l2vpn

    MPLS L2VPN is enabled and the MPLS L2VPN view is displayed.

  3. Run quit

    Return to the system view.

  4. Run interface virtual-ethernet ve-number.subnumber

    The L2VE sub-interface view is displayed.

  5. Run dot1q termination vid vlan-id

    A VLAN ID is configured for the L2VE sub-interface.

  6. Run mpls l2vc { ip-address | pw-template pw-template-name } * vc-id [ group-id group-id | tunnel-policy policy-name | [ control-word | no-control-word ] | [ raw | tagged ] | ignore-standby-state ] *

    A Martini VLL is created.

    The tunnel policy for a Martini VLL defaults to LSP and no load balancing is performed. If a tunnel of another type is needed, you can specify tunnel-policy policy-name to apply the matching tunnel policy.

    To create a Martini VLL, you need to specify the IP address and VC ID of the destination PE. The VC IDs of PEs at both ends of the VC must be the same.

Translation
Download
Updated: 2019-04-01

Document ID: EDOC1000178118

Views: 157796

Downloads: 157

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next