No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 Configuration Guide - VPN

This document describes the VPN configuration procedures and provides configuration examples.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Configuring MAC Withdraw Loop Detection

Configuring MAC Withdraw Loop Detection

Context

Media Access Control (MAC) Withdraw loop detection prevents MAC Withdraw message loops.

Procedure

  1. Run system-view

    The system view is displayed.

  2. Run mpls l2vpn

    Layer 2 virtual private network (L2VPN) is enabled, and the L2VPN view is displayed.

  3. Run vpls mac-withdraw loop-detect enable

    MAC Withdraw loop detection is enabled.

    By default, MAC Withdraw loop detection is disabled.

Verifying the Configuration

  • Run the display vsi [ name vsi-name ] verbose command to check the MAC Withdraw configuration.

  • Run the display vsi [ name vsi-name ] mac-withdraw loop-detect command to check information about MAC Withdraw message loops.

Translation
Download
Updated: 2019-04-01

Document ID: EDOC1000178118

Views: 159244

Downloads: 159

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next