No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwCBQoSMatchRuleCfgInfoTable

hwCBQoSMatchRuleCfgInfoTable

This table configures rules in traffic classifiers. Traffic is classified by these rules, and then differentiated QoS services are provided for the traffic.

The indexes of this table are hwCBQoSClassifierIndex and hwCBQoSMatchRuleIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.1

hwCBQoSMatchRuleIndex

Integer32

Read-only

This object indicates the rule index. The value ranges from 0 to 1023.

There is no default value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.3

hwCBQoSMatchRuleType

MatchRuleType

Read-create

This object indicates the rule type:
  • 1:any
  • 2:ipv4-acl
  • 5: ip-prec
  • 6:dscp
  • 7:vlan-8021p
  • 8: mpls-exp
  • 9:source-mac
  • 10:destination-mac
  • 14: ipv6-acl
  • 18: ipv6-dscp
  • 19: ipv6-nextheader
  • 24:vlan-id
  • 25:outbound-interface
  • 26:l2-protocol
  • 28:tcpFlag
  • 29: cvlan-id
  • 30: double-tag
  • 32: cvlan-8021p
  • 33: discard
  • 37: vlanid-cvlanid

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.4

hwCBQoSMatchRuleStringValue

OCTET STRING

Read-create

This object indicates the rule value. This object is valid only when the matching rule based on the outbound interface, source MAC address, or destination MAC address is used.

When the matching rule is based on an outbound interface, the value format is interface-typeinterface number, for example, GigabitEthernet1/0/1.

When the matching rule is based on the source MAC address or destination MAC address, the value is a hexadecimal string. For example, if a MAC address is 0-0-1, the corresponding value is # 0x00 0x00 0x00 0x00 0x00 0x01. # indicates the hexadecimal format.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.5

hwCBQoSMatchRuleIntValue1

Unsigned32

Read-create

This object indicates the rule content. The value is an integer. The value range depends on the rule type:

  • If the rule is acl, the value ranges from 2000 to 5999.
  • If the rule is dscp, the value ranges from 0 to 63.
  • If the rule is vlan-8021p, the value ranges from 0 to 7.
  • If the rule is cvlan-8021p, the value ranges from 0 to 7.
  • If the rule is vlan-id, the value ranges from 1 to 4094.
  • If the rule is cvlan-id, the value ranges from 1 to 4094.
  • If the rule is l2-protocol, the value ranges from 0 to 65535. For example, if the l2-protocol is ARP, the value is 2054 (0x0806).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.6

hwCBQoSMatchRuleIntValue2

Unsigned32

Read-create

This object indicates a rule based on DSCP priorities. The DSCP value ranges from 0 to 31.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.32.1.1.1.3.1.7

hwCBQoSMatchRuleRowStatus

RowStatus

Read-create

This object indicates the row status:

  • 1: active
  • 4: createandgo
  • 6: destroy

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

You can create entries in this table only after hwCBQoSClassifierCfgInfoTable is created.

hwCBQoSMatchRuleIndex must be the same as hwCBQoSClassifierRuleCount mapping hwCBQoSClassifierIndex in the hwCBQoSClassifierCfgInfoTable.

You can create entries in this table only when the row status is CreateAndGo, and values of hwCBQoSClassifierIndex, hwCBQoSMatchRuleIndex, and hwCBQoSMatchRuleType are set.

The restrictions on the settings of hwCBQoSMatchRuleStringValue and hwCBQoSMatchRuleIntValue1 depend on the value of hwCBQoSMatchRuleType.
  • hwCBQoSMatchRuleIndex must be configured, and its value must be the same as hwCBQoSClassifierRuleCount in the hwCBQoSClassifierCfgInfoTable.
  • hwCBQoSMatchRuleType must be configured:
    • If the rule is source-mac, or destination-mac, hwCBQoSMatchRuleStringValue must be configured, but hwCBQoSMatchRuleIntValue1 cannot be configured; otherwise, an error message is displayed.
    • If the rule is ipv4-acl, vlan-8021p, vlan-id, l2-protocol, cvlan-id, dscp, or cvlan-8021p, hwCBQoSMatchRuleIntValue1 must be configured, but hwCBQoSMatchRuleStringValue cannot be configured; otherwise, an error message is displayed.
    • If the rule is any, discard, or double-tag, hwCBQoSMatchRuleStringValue or hwCBQoSMatchRuleIntValue1 cannot be configured; otherwise, an error message is displayed.

Modification Restriction

The entries in this table can be modified only when the matching rule based on the ACL, VLAN ID or C-VLAN ID is used.

Deletion Restriction

If the traffic classifier has been applied to the entire system, an interface, or a VLAN, the entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

Translation
Download
Updated: 2019-03-29

Document ID: EDOC1000178122

Views: 764952

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next