No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
nqaPathJitterStatsTable

nqaPathJitterStatsTable

The nqaPathJitterStatsTable contains the results of a path jitter test. Based on the statistics, the hop-by-hop (from the source to each hop along the tested path) delay, jitter, and packet loss can be calculated.

The indexes of this table nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, nqaPathJitterStatsIndex, and nqaPathJitterStatsHopIndex, with the first two being external indexes.

OID

Object Name

Syntax

MAX Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.4.8.1.1

nqaPathJitterStatsIndex

Integer32 (1..'7FFFFFFF'h)

Not-accessible

This object indicates the index of the statistics on the path jitter.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.2

nqaPathJitterStatsHopIndex

Integer32 (1..255)

Not-accessible

This object indicates the hop index of the path jitter.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.3

nqaPathJitterStatsCompletions

INTEGER

  • noResult(0)
  • success(1)
  • failure(2)

Read-only

This object indicates the execution result for the test case.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.4

nqaPathJitterStatsAddressType

InetAddressType

Read-only

This object indicates the type of the destination address of each hop, and the value range can be unknown(0), ipv4(1) and dns(16).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.5

nqaPathJitterStatsAddress

InetAddress

Read-only

This object indicates the destination address of each hop.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.7

nqaPathJitterStatsNumOfRTT

Counter32

Read-only

This object indicates the number of times that a response is received and that the RTT is successfully calculated by each hop.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.8

nqaPathJitterStatsRttSum

Counter32

Read-only

This object indicates the sum of RTTs of all the packets received by each hop.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.9

nqaPathJitterStatsRttSum2Low

Counter32

Read-only

This object indicates the lower 32 bits of the sum of square of the RTT of every hop.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.10

nqaPathJitterStatsRttSum2High

Counter32

Read-only

This object indicates the higher 32 bits of the sum of square of the RTT of every hop.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.11

nqaPathJitterStatsRttMin

Gauge32

Read-only

This object indicates the minimum RTT of each hop.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.12

nqaPathJitterStatsRttMax

Gauge32

Read-only

This object indicates the maximum RTT of each hop.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.13

nqaPathJitterStatsMinOfPositivesSD

Gauge32

Read-only

This object indicates the minimum positive jitter value of all packets that sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.14

nqaPathJitterStatsMaxOfPositivesSD

Gauge32

Read-only

This object indicates the maximum positive jitter value of all packets that sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.15

nqaPathJitterStatsNumOfPositivesSD

Counter32

Read-only

This object indicates the number of packets that are sent from the source to the destination with positive jitter values in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.16

nqaPathJitterStatsSumOfPositivesSD

Counter32

Read-only

This object indicates the sum of the positive jitter values of all packets that are successfully sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.17

nqaPathJitterStatsSum2OfPositivesSDLow

Counter32

Read-only

This object indicates the lower 32 bits of the sum of the square of the positive jitter value of every packet that is successfully sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.18

nqaPathJitterStatsSum2OfPositivesSDHigh

Counter32

Read-only

This object indicates the higher 32 bits of the sum of the square of the positive jitter value of every packet that is successfully sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.19

nqaPathJitterStatsMinOfNegativesSD

Gauge32

Read-only

This object indicates the absolute value of the minimum negative jitter value of all packets that are sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.20

nqaPathJitterStatsMaxOfNegativesSD

Gauge32

Read-only

This object indicates the absolute value of the maximum negative jitter value of all packets that are sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.21

nqaPathJitterStatsNumOfNegativesSD

Counter32

Read-only

This object indicates the number of packets with negative jitter values that are sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.22

nqaPathJitterStatsSumOfNegativesSD

Counter32

Read-only

This object indicates sum of the absolute value of the negative jitter value of every packet that is successfully sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.23

nqaPathJitterStatsSum2OfNegativesSDLow

Counter32

Read-only

This object indicates the lower 32 bits of the sum of the square of the negative jitter value of every packet that is successfully sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.24

nqaPathJitterStatsSum2OfNegativesSDHigh

Counter32

Read-only

This object indicates the higher 32 bits of the sum of the square of the negative jitter value of every packet that is successfully sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.25

nqaPathJitterStatsMinOfPositivesDS

Gauge32

Read-only

This object indicates the minimum positive jitter value of all packets that sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.26

nqaPathJitterStatsMaxOfPositivesDS

Gauge32

Read-only

This object indicates the maximum positive jitter value of all packets that sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.27

nqaPathJitterStatsNumOfPositivesDS

Counter32

Read-only

This object indicates the number of packets that are sent from the destination to the source with positive jitter values in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.28

nqaPathJitterStatsSumOfPositivesDS

Counter32

Read-only

This object indicates the sum of the positive jitter value of every packet that is sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.29

nqaPathJitterStatsSum2OfPositivesDSLow

Counter32

Read-only

This object indicates the lower 32 bits of the sum of the square of the positive jitter value of every packet that is successfully sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.30

nqaPathJitterStatsSum2OfPositivesDSHigh

Counter32

Read-only

This object indicates the higher 32 bits of the sum of the square of the positive jitter value of every packet that is successfully sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.31

nqaPathJitterStatsMinOfNegativesDS

Gauge32

Read-only

This object indicates the absolute value of the minimum negative jitter value of all packets that are sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.32

nqaPathJitterStatsMaxOfNegativesDS

Gauge32

Read-only

This object indicates the absolute value of the maximum negative jitter value of all packets that are sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.33

nqaPathJitterStatsNumOfNegativesDS

Counter32

Read-only

This object indicates the number of packets that are sent from the destination to the source with negative jitter values in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.34

nqaPathJitterStatsSumOfNegativesDS

Counter32

Read-only

This object indicates the sum of the absolute value of the negative jitter value of every packet that is sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.35

nqaPathJitterStatsSum2OfNegativesDSLow

Counter32

Read-only

This object indicates the lower 32 bits of the sum of the square of the negative jitter value of every packet that is successfully sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.36

nqaPathJitterStatsSum2OfNegativesDSHigh

Counter32

Read-only

This object indicates the higher 32 bits of the sum of the square of the negative jitter value of every packet that is successfully sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.39

nqaPathJitterStatsPacketOutOfSequences

Counter32

Read-only

This object indicates the number of the packets with incorrect sequence numbers that are received in a path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.40

nqaPathJitterStatsErrors

Counter32

Read-only

This object indicates statistics on test errors that are not collected by the other objects in this table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.41

nqaPathJitterStatsBusies

Counter32

Read-only

This object indicates the number of initialization failures or resource application failures.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.42

nqaPathJitterStatsTimeouts

Counter32

Read-only

This object indicates the number of timeout packets in a path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.43

nqaPathJitterStatsProbeResponses

Counter32

Read-only

This object indicates the number of response packets received in a Jitter test. The value of this object MUST be reported as 0 when no probe responses have been received.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.44

nqaPathJitterStatsSentProbes

Counter32

Read-only

This object indicates the number of data packets sent in each hop in a jitter test. The value of this object MUST be reported as 0 when no probes have been sent.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.45

nqaPathJitterStatsDrops

Counter32

Read-only

This object indicates the number of data packets discarded because of sending failure in all hops in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.46

nqaPathJitterStatsTestFinished

INTEGER

  • nofinish(0)
  • finish(1)

Read-only

This object indicates the execution result for the test case.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.47

nqaPathJitterStatsMaxDelaySD

Gauge32

Read-only

This object indicates the maximum delay of all hops from the source to the destination.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.48

nqaPathJitterStatsMaxDelayDS

Gauge32

Read-only

This object indicates the maximum delay of all hops from the destination to the source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.49

nqaPathJitterStatsRttAvg

Gauge32

Read-only

This object indicates the average value of RTTs of all hops.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.50

nqaPathJitterStatsPacketLossRatio

Gauge32

Read-only

This object indicates the packet loss ratio of every hop in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.51

nqaPathJitterStatsAvgJitter

Gauge32

Read-only

This object indicates the average jitter value of all hops.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.52

nqaPathJitterStatsAvgJitterSD

Gauge32

Read-only

This object indicates the average jitter value of all hops from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.53

nqaPathJitterStatsAvgJitterDS

Gauge32

Read-only

This object indicates the average jitter value of all hops from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.54

nqaPathJitterStatsJitterOut

OCTET STRING

Read-only

This object indicates the jitter (RFC1889) value of the outgoing packets of every hop in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.55

nqaPathJitterStatsJitterIn

OCTET STRING

Read-only

This object indicates the jitter (RFC1889) value of the incoming packets of every hop in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.56

nqaPathJitterStatsOwdOverThresholdsSD

Counter32

read-only

The number of tests that violate OWD (One Way Delay) threshold from source to destination in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.58

nqaPathJitterStatsNumOfOWD

Counter32

Read-only

This object indicates the number of successfully tested hops with uni-directional delay.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.59

nqaPathJitterStatsOwdSumSD

Counter32

Read-only

This object indicates the number of hops (from the source to the destination) with uni-directional delay.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.60

nqaPathJitterStatsOwdSumDS

Counter32

Read-only

This object indicates the number of hops (from the destination to the source) with uni-directional delay.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.4.8.1.61

nqaPathJitterStatsOwdOverThresholdsDS

Counter32

read-only

The number of tests that violate OWD (One Way Delay) threshold from destination to source in a hop of path jitter test.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

Translation
Download
Updated: 2019-03-29

Document ID: EDOC1000178122

Views: 750977

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next