No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
mgmdRouterInterfaceTable

mgmdRouterInterfaceTable

This table lists parameters of IGMP or MLD enabled on an interface.

The indexes of this table are mgmdRouterInterfaceIfIndex and mgmdRouterInterfaceQuerierType.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.185.1.2.1.1

mgmdRouterInterfaceIfIndex

InterfaceIndex

Not-accessible

The ifIndex value of the interface for which IGMP or MLD is enabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.185.1.2.1.2

mgmdRouterInterfaceQuerierType

InetAddressType

{

ipv4(1),

ipv6(2)

}

Not-accessible

The address type of this interface.
  • 1: IPv4

  • 2: IPv6

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.185.1.2.1.3

mgmdRouterInterfaceQuerier

InetAddress (SIZE(4|16))

Read-only

The address of the IGMP or MLD Querier on the IP subnet to which this interface is attached.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.185.1.2.1.4

mgmdRouterInterfaceQueryInterval

Unsigned32 (1..31744)

Read-create

The frequency at which IGMP or MLD Host-Query packets are transmitted on this interface.

The value ranges from 1 to 31744, in seconds.

The default value is 125.

The IGMP query interval defaults to be 60 seconds and the MLD query interval defaults to be 125 seconds.

Currently, the value range of 1 to 18000 is supported.

1.3.6.1.2.1.185.1.2.1.5

mgmdRouterInterfaceStatus

RowStatus

Read-create

The activation of a row enables the router side of IGMP or MLD on the interface.

Currently, the Set operation supports the CreateAndGo and the Destroy.

When you perform the Get operation on this object, active(1) is returned.

1.3.6.1.2.1.185.1.2.1.6

mgmdRouterInterfaceVersion

Unsigned32 (1..3)

Read-create

The version of MGMD that is running on this interface.
  • 1: IGMPv1
  • 2: IGMPv2 or MLDv1
  • 3: IGMPv3 or MLDv2

By default, the version of IGMP is IGMPv3, the version of MLD is MLDv2.

By default, the version of IGMP is IGMPv2, the version of MLD is MLDv2.

1.3.6.1.2.1.185.1.2.1.7

mgmdRouterInterfaceQueryMaxResponseTime

Unsigned32 (0..31744)

Read-create

The maximum query response interval advertised in MGMDv2 or IGMPv3 queries on this interface.

The value is in 1/10 seconds.

The value ranges from 0 to 31744.

The default value is 100.

Currently, the value range of 10 to 250 is supported.

NOTE:

As defined in the protocol, the mgmdRouterInterfaceQueryMaxResponseTime is represented in tenths of seconds. our devices, however, implement the mgmdRouterInterfaceQueryMaxResponseTime only in seconds. During value transition, an offset is generated because integer rounding is done.

1.3.6.1.2.1.185.1.2.1.8

mgmdRouterInterfaceQuerierUpTime

TimeTicks

Read-only

The time since mgmdRouterInterfaceQuerier was last changed.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.185.1.2.1.9

mgmdRouterInterfaceQuerierExpiryTime

TimeTicks

Read-only

The amount of time remaining before the Other Querier Present Timer expires. If the local system is the querier, the value of this object is zero.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.185.1.2.1.10

mgmdRouterInterfaceWrongVersionQueries

Counter32

Read-only

The number of general queries received whose IGMP or MLD version does not match the equivalent mgmdRouterInterfaceVersion, over the lifetime of the row entry.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.185.1.2.1.11

mgmdRouterInterfaceJoins

Counter32

Read-only

The number of times a group membership has been added on this interface, that is, the number of times an entry for this interface has been added to the Cache Table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.185.1.2.1.12

mgmdRouterInterfaceProxyIfIndex

InterfaceIndexOrZero

Read-create

Some devices implement a form of IGMP or MLD proxying whereby memberships learned on the interface represented by this row cause Host Membership Reports to be sent on the interface whose ifIndex value is given by this object. Such a device would implement the mgmdV2RouterBaseMIBGroup only on its router interfaces (those interfaces with non-zero mgmdRouterInterfaceProxyIfIndex). Typically, the value of this object is 0, indicating that no proxying is being done.

The default value is 0.

The maximum access is Read-only;

The value of this object is always 0.

1.3.6.1.2.1.185.1.2.1.13

mgmdRouterInterfaceGroups

Gauge32

Read-only

The current number of entries for this interface in the mgmdRouterCacheTable.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.185.1.2.1.14

mgmdRouterInterfaceRobustness

Unsigned32 (1..255)

Read-create

The Robustness Variable allows tuning for the expected packet loss on a subnet.

The value ranges from 1 to 255.

The default value is 2.

Currently, the value range of 2 to 5 is supported.

When the interface runs IGMPv1, the value 1 is returned after you perform the Get operation on the object. The value 1 is meaningless.

1.3.6.1.2.1.185.1.2.1.15

mgmdRouterInterfaceLastMemberQueryInterval

Unsigned32 (0..31744)

Read-create

The Last Member Query Interval is the Max Query Response Interval inserted into group-specific queries sent in response to leave group messages, and is also the amount of time between group-specific query messages.

The value is in 1/10 seconds.

The value ranges from 0 to 31744.

The default value is 10.

Currently, the value range of 10 to 50 is supported.

NOTE:

As defined in the protocol, the mgmdRouterInterfaceQueryMaxResponseTime is represented in tenths of seconds. our devices, however, implement the mgmdRouterInterfaceQueryMaxResponseTime only in seconds. During value transition, an offset is generated because integer rounding is done.

1.3.6.1.2.1.185.1.2.1.16

mgmdRouterInterfaceLastMemberQueryCount

Unsigned32 (1..255)

Read-only

Represents the number of group-specific and group-and-source-specific queries sent by the router before it assumes there are no local members.

The value ranges from 1 to 255.

Currently, the value range of 2 to 5 is supported.

When the interface runs IGMPv1, the value 1 is returned after you perform the Get operation on the object. The value 1 is meaningless.

1.3.6.1.2.1.185.1.2.1.17

mgmdRouterInterfaceStartupQueryCount

Unsigned32 (1..255)

Read-only

Represents the number of Queries sent out on startup, separated by the Startup Query Interval.

The value ranges from 1 to 255.

Currently, the value range of 2 to 5 is supported.

When the interface runs IGMPv1, the value 1 is returned after you perform the Get operation on the object. The value 1 is meaningless.

1.3.6.1.2.1.185.1.2.1.18

mgmdRouterInterfaceStartupQueryInterval

Unsigned32 (0..31744)

Read-only

This variable represents the interval between General Queries sent by a Querier on startup.

The time is expressed in seconds.

The value ranges from 0 to 31744.

Currently, the value range of 0 to 4500 is supported.

Creation Restriction

None

Modification Restriction

The value range of mgmdRouterInterfaceQueryInterval defined in the MIB protocol is 1 to 31744, but the command line supports only 1 to 18000. Therefore, if the value set in the MIB is not within the range that the command line supports, the set operation fails and an error code "Wrong value" is returned.

The value range of mgmdRouterInterfaceQueryMaxResponseTime defined in the MIB is 0 to 31744, in 1/10 seconds, but the command line supports only 1 to 25, in seconds. Therefore, the value set in the MIB must be in the range of 10 to 250; otherwise, the set operation fails and an error code "Wrong value" is returned.

The value range of mgmdRouterInterfaceRobustness defined in the MIB is 1 to 255, but the command line supports only 2 to 5. Therefore, if the value range set in the MIB is not within the range that the command line supports, the set operation fails and an error code "Wrong value" is returned.

The value range of mgmdRouterInterfaceLastMemberQueryInterval defined in the MIB is 0 to 31744, in 1/10 seconds whereas the command line supports only 1 to 5. Therefore, the value set in the MIB must be within the range of 10 to 50; otherwise, the set operation fails and an error code "Wrong value" is returned.

The current system structure does not support operations on mgmdRouterInterfaceProxyIfIndex. If you perform a Get operation to this object through the MIB browser, the default value 0 is returned; if you perform a Set operation to this object, an error code "Generic error" is returned.

The value ranges of mgmdRouterInterfaceLastMemberQueryCount, mgmdRouterInterfaceStartupQueryCount, and mgmdRouterInterfaceStartupQueryInterval defined in the MIB are all greater than or equal to the ranges that command line supports. When you perform Get operations to these objects, the ranges supported by the command line are returned.

Deletion Restriction

None

Access Restriction

The entries in this table can be read only when multicast is enabled and IGMP or MLD is enabled on an interface.

Translation
Download
Updated: 2019-03-29

Document ID: EDOC1000178122

Views: 758691

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next