No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ipRouteTable

ipRouteTable

This table is used to display the information of routes that reach the destination address.

The index of this table is ipRouteDest.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.4.21.1.1

ipRouteDest

IpAddress

Read-write

The destination IP address of this route. An entry with a value of 0.0.0.0 is considered a default route. Multiple routes to a single destination can appear in the table, but access to such multiple entries is dependent on the table- access mechanisms defined by the network management protocol in use.

Currently, the maximum access is read-only.

1.3.6.1.2.1.4.21.1.2

ipRouteIfIndex

INTERGER

Read-write

The index value which uniquely identifies the local interface through which the next hop of this route should be reached. The interface identified by a particular value of this index is the same interface as identified by the same value of ifIndex.

Currently, the maximum access is read-only.

1.3.6.1.2.1.4.21.1.3

ipRouteMetric1

INTEGER

Read-write

The primary routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.

Currently, the maximum access is read-only.

1.3.6.1.2.1.4.21.1.4

ipRouteMetric2

INTEGER

Read-write

An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.

Currently, the maximum access is read-only.

1.3.6.1.2.1.4.21.1.5

ipRouteMetric3

INTEGER

Read-write

An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.

Currently, the maximum access is read-only.

1.3.6.1.2.1.4.21.1.6

ipRouteMetric4

INTEGER

Read-write

An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.

Currently, the maximum access is read-only.

1.3.6.1.2.1.4.21.1.7

ipRouteNextHop

IpAddress

Read-write

The IP address of the next hop of this route. (In the case of a route bound to an interface which is realized via a broadcast media, the value of this field is the agent's IP address on that interface.)

Currently, the maximum access is read-only.

1.3.6.1.2.1.4.21.1.8

ipRouteType

INTEGER{other(1),invalid(2),direct(3),indirect(4)}

Read-write

The type of route. Note that the values direct(3) and indirect(4) refer to the notion of direct and indirect routing in the IP architecture.

Setting this object to the value invalid(2) has the effect of invalidating the corresponding entry in the ipRouteTable object. That is, it effectively disassociates the destination identified with said entry from the route identified with said entry. It is an implementation-specific matter as to whether the agent removes an invalidated entry from the table. Accordingly, management stations must be prepared to receive tabular information from agents that corresponds to entries not currently in use. Proper interpretation of such entries requires examination of the relevant ipRouteType object.

Currently, the maximum access is read-only.

1.3.6.1.2.1.4.21.1.9

ipRouteProto

INTEGER{other(1),local(2),netmgmt(3),icmp(4),egp(5),ggp(6),hello(7),rip(8),is-is(9),es-is(10),ciscoIgrp(11),bbnSpfIgp(12),ospf(13),bgp(14)}

Read-only

The routing mechanism via which this route was learned. Inclusion of values for gateway routing protocols is not intended to imply that hosts should support those protocols.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.4.21.1.10

ipRouteAge

INTEGER

Read-write

The number of seconds since this route was last updated or otherwise determined to be correct. Note that no semantics of 'too old' can be implied except through knowledge of the routing protocol by which the route was learned.

Currently, the maximum access is read-only.

1.3.6.1.2.1.4.21.1.11

ipRouteMask

IpAddress

Read-write

Indicate the mask to be logical-ANDed with the destination address before being compared to the value in the ipRouteDest field. For those systems that do not support arbitrary subnet masks, an agent constructs the value of the ipRouteMask by determining whether the value of the correspondent ipRouteDest field belong to a class-A, B, or C network, and then using one of: mask network

255.0.0.0 class-A

255.255.0.0 class-B

255.255.255.0 class-C

If the value of the ipRouteDest is 0.0.0.0 (a default route), then the mask value is also 0.0.0.0. It should be noted that all IP routing subsystems implicitly use this mechanism.

Currently, the maximum access is read-only.

1.3.6.1.2.1.4.21.1.12

ipRouteMetric5

INTEGER

Read-write

An alternate routing metric for this route. The semantics of this metric are determined by the routing-protocol specified in the route's ipRouteProto value. If this metric is not used, its value should be set to -1.

Currently, the maximum access is read-only.

1.3.6.1.2.1.4.21.1.13

ipRouteInfo

OBJECT IDENTIFIER

Read-only

A reference to MIB definitions specific to the particular routing protocol which is responsible for this route, as determined by the value specified in the route's ipRouteProto value. If this information is not present, its value should be set to the OBJECT IDENTIFIER { 0 0 }, which is a valid object identifier, and any conformant implementation of ASN.1 and BER must be able to generate and recognize this value.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The entries in this table cannot be created.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The value of IpRouteMask depends on the address type of ipRouteDest. For example, if the ipRouteDest is a Class C address, ipRouteMask is 255.255.255.0.

Translation
Download
Updated: 2019-03-29

Document ID: EDOC1000178122

Views: 763942

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next