No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwL2QinQVlanTable

hwL2QinQVlanTable

This table is used to configure VLAN stacking and VLAN mapping.

The indexes of this table are hwL2QinQVlanIfIndex, hwL2QinQVlanIdBegin, hwL2QinQVlanIdEnd, hwL2QinQVlanInnerVlanIdBegin, hwL2QinQVlanInnerVlanIdEnd, hwL2QinQVlan8021pBegin, hwL2QinQVlan8021pEnd, and hwL2QinQVlanEtherType.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.1

hwL2QinQVlanIfIndex

InterfaceIndex

Not-accessible

This object indicates an interface index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.2

hwL2QinQVlanIdBegin

VlanId

Not-accessible

This object indicates the start value of the outer VLAN tag before tag replacement. The value ranges from 1 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.3

hwL2QinQVlanIdEnd

VlanId

Not-accessible

This object indicates the end value of the outer VLAN tag before tag replacement. The value ranges from 1 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.4

hwL2QinQVlanInnerVlanIdBegin

VlanIdOrNone

Not-accessible

This object indicates the start value of the inner VLAN tag before tag replacement. The value ranges from 0 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.5

hwL2QinQVlanInnerVlanIdEnd

VlanIdOrNone

Not-accessible

This object indicates the end value of the inner VLAN tag before tag replacement. The value ranges from 0 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.6

hwL2QinQVlan8021pBegin

Integer(0..8)

Not-accessible

This object indicates the start value of the 802.1p priority before tag replacement.

NOTE:

By default, the value of hwL2QinQVlan8021pBegin is 8, indicating that no 802.1p priority is configured.

Currently, the value range of 0 to 7 is supported.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.7

hwL2QinQVlan8021pEnd

Integer(0..8)

Not-accessible

This object indicates the end value of the 802.1p priority before tag replacement.

NOTE:

By default, the value of hwL2QinQVlan8021pEnd is 8, indicating that no 802.1p priority is configured.

Currently, the value range of 0 to 7 is supported.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.8

hwL2QinQVlanEtherType

Integer(0..65535)

Not-accessible

This object indicates the Ethernet type before tag replacement.

The value of hwL2QinQVlan8021pBegin ranges from 1 to 65535.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.9

hwL2QinQVlanMode

INTEGER

{

stacking(1),

mapping(2),

cosstacking(3),

cosmapping(4),

mapping2to1(5),

mapping2to2(6)

}

Read-create

The value of this object identifies the configuration mode of hwL2QinQVlanTable.

  • stacking(1)

    After receiving a tagged frame, an interface adds a tag to the frame according to the carried VLAN ID.

  • mapping(2)

    After receiving a tagged frame, an interface maps the carried tag to a specified tag according to the carried VLAN ID.

  • cosstacking(3)

    After receiving a tagged frame, an interface adds a tag to the frame and maps the inner tag to a specified VLAN ID according to the carried VLAN ID and 802.1p priority.

  • cosmapping(4)

    After receiving a tagged frame, an interface maps the carried tag to a specified tag according to the carried VLAN ID and 802.1p priority.

  • mapping2to1(5)

    After receiving a tagged frame, an interface maps the outer tag to a specified tag and transparently transmits the inner tag.

  • mapping2to2(6)

    After receiving a tagged frame, an interface maps both tags to specified tags.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.10

hwL2QinQVlanChangedVlanId

VlanId

Read-create

This object indicates the VLAN ID in the outer tag after tag replacement. The value ranges from 0 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.11

hwL2QinQVlanChangedInnerVlanId

VlanIdOrNone

Read-create

This object indicates the VLAN ID in the inner tag after tag replacement. The value ranges from 0 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.12

hwL2QinQVlanRemark

Integer(0..8)

Read-create

The value of this object identifies the 802.1p priority after tag replacement.

NOTE:

By default, the value of hwL2QinQVlanRemark is 8, indicating that no 802.1p priority is configured.

Currently, the value range of 0 to 7 is supported.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.13

hwL2QinQVlanMapStackVlanId

VlanIdOrNone

Read-create

This object indicates the VLAN ID in the inner tag after tag replacement. The value ranges from 1 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.14

hwL2QinQVlanRowStatus

RowStatus

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.15

hwL2QinQVlanInnerRemark

Integer32(0..8)

read-create

The value of this object identifies changed priority in the inner VLAN tag. No change is needed if the value is 8.

NOTE:

By default, the value of hwL2QinQVlanInnerRemark is 8, indicating that no 802.1p priority is configured.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

Common restrictions are as follows:
  • hwL2QinQVlanIfIndex must specify a Layer 2 interface.

  • The value of hwL2QinQVlanIdBegin ranges from 1 to 4094.

  • The value of hwL2QinQVlanIdEnd must be greater than or equal to the value of hwL2QinQVlanIdBegin.

  • The value of hwL2QinQVlanChangedVlanId ranges from 1 to 4094.

Restrictions on VLAN stacking are as follows:
  • hwL2QinQVlanInnerVlanIdBegin

    By default, the value of hwL2QinQVlanInnerVlanIdBegin is 0.

  • hwL2QinQVlanInnerVlanIdEnd

    By default, the value of hwL2QinQVlanInnerVlanIdEnd is 0.

  • hwL2QinQVlan8021pBegin

    By default, the value of hwL2QinQVlan8021pBegin is 8.

  • hwL2QinQVlan8021pEnd

    By default, the value of hwL2QinQVlan8021pEnd is 8.

  • hwL2QinQVlanEtherType

    By default, the value of hwL2QinQVlanEtherType is 0.

  • hwL2QinQVlanMode

    By default, the value of hwL2QinQVlanMode is 1, indicating VLAN stacking.

  • hwL2QinQVlanChangedInnerVlanId

    By default, the value of hwL2QinQVlanChangedInnerVlanId is 0.

Restrictions on VLAN stacking+802.1p are as follows:
  • hwL2QinQVlanInnerVlanIdBegin

    By default, the value of hwL2QinQVlanInnerVlanIdBegin is 0.

  • hwL2QinQVlanInnerVlanIdEnd

    By default, the value of hwL2QinQVlanInnerVlanIdEnd is 0.

  • The valid value of hwL2QinQVlan8021pBegin ranges from 0 to 7.

  • The value of hwL2QinQVlan8021pEnd must be greater than or equal to the value of hwL2QinQVlan8021pBegin.

  • hwL2QinQVlanEtherType

    By default, the value of hwL2QinQVlanEtherType is 0.

  • hwL2QinQVlanMode

    By default, the value of hwL2QinQVlanMode is 3, indicating VLAN stacking+802.1p.

  • hwL2QinQVlanChangedInnerVlanId

    By default, the value of hwL2QinQVlanChangedInnerVlanId is 0.

Restrictions on 1 to 1 VLAN mapping are as follows:
  • hwL2QinQVlanInnerVlanIdBegin

    By default, the value of hwL2QinQVlanInnerVlanIdBegin is 0.

  • hwL2QinQVlanInnerVlanIdEnd

    By default, the value of hwL2QinQVlanInnerVlanIdEnd is 0.

  • hwL2QinQVlan8021pBegin

    By default, the value of hwL2QinQVlan8021pBegin is 8.

  • hwL2QinQVlan8021pEnd

    By default, the value of hwL2QinQVlan8021pEnd is 8.

  • hwL2QinQVlanEtherType

    By default, the value of hwL2QinQVlanEtherType is 0.

  • hwL2QinQVlanMode

    By default, the value of hwL2QinQVlanMode is 2, indicating 1 to 1 VLAN mapping.

  • hwL2QinQVlanChangedInnerVlanId

    By default, the value of hwL2QinQVlanChangedInnerVlanId is 0.

  • hwL2QinQVlanMapStackVlanId

    By default, the value of hwL2QinQVlanMapStackVlanId is 0.

Restrictions on 1 to 1 VLAN mapping+8021p are as follows:
  • hwL2QinQVlanInnerVlanIdBegin

    By default, the value of hwL2QinQVlanInnerVlanIdBegin is 0.

  • hwL2QinQVlanInnerVlanIdEnd

    By default, the value of hwL2QinQVlanInnerVlanIdEnd is 0.

  • The valid value of hwL2QinQVlan8021pBegin ranges from 0 to 7.

  • The value of hwL2QinQVlan8021pEnd must be greater than or equal to the value of hwL2QinQVlan8021pBegin.

  • hwL2QinQVlanEtherType

    By default, the value of hwL2QinQVlanEtherType is 0.

  • hwL2QinQVlanMode is cosmapping(4)

    By default, the value of hwL2QinQVlanMode is 4, indicating 1 to 1 VLAN mapping+802.1p.

  • hwL2QinQVlanChangedInnerVlanId

    By default, the value of hwL2QinQVlanChangedInnerVlanId is 0.

  • hwL2QinQVlanMapStackVlanId

    By default, the value of hwL2QinQVlanMapStackVlanId is 0.

Restrictions on 2 to 1 VLAN mapping are as follows:
  • The value of hwL2QinQVlanInnerVlanIdBegin ranges from 1 to 4094.

  • The value of hwL2QinQVlanInnerVlanIdEnd must be greater than or equal to the value of hwL2QinQVlanInnerVlanIdBegin.

  • hwL2QinQVlan8021pBegin

    By default, the value of hwL2QinQVlan8021pBegin is 8.

  • hwL2QinQVlan8021pEnd

    By default, the value of hwL2QinQVlan8021pEnd is 8.

  • hwL2QinQVlanMode

    By default, the value of hwL2QinQVlanMode is 5, indicating 2 to 1 VLAN mapping.

  • hwL2QinQVlanChangedInnerVlanId

    By default, the value of hwL2QinQVlanChangedInnerVlanId is 0.

  • hwL2QinQVlanMapStackVlanId

    By default, the value of hwL2QinQVlanMapStackVlanId is 0.

Restrictions on 2 to 2 VLAN mapping are as follows:
  • The value of hwL2QinQVlanInnerVlanIdBegin ranges from 1 to 4094.

  • The value of hwL2QinQVlanInnerVlanIdEnd must be greater than or equal to the value of hwL2QinQVlanInnerVlanIdBegin.

  • hwL2QinQVlan8021pBegin

    By default, the value of hwL2QinQVlan8021pBegin is 8.

  • hwL2QinQVlan8021pEnd

    By default, the value of hwL2QinQVlan8021pEnd is 8.

  • hwL2QinQVlanEtherType

    By default, the value of hwL2QinQVlanEtherType is 0.

  • hwL2QinQVlanMode

    By default, the value of hwL2QinQVlanMode is 6, indicating 2 to 2 VLAN mapping.

  • The value of hwL2QinQVlanChangedInnerVlanId ranges from 1 to 4094.

  • hwL2QinQVlanMapStackVlanId

    By default, the value of hwL2QinQVlanMapStackVlanId is 0.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

  • hwL2QinQVlanIfIndex must specify a Layer 2 interface.

  • The value of hwL2QinQVlanIdBegin ranges from 1 to 4094.

  • The value of hwL2QinQVlanIdEnd must be greater than or equal to the value of hwL2QinQVlanIdBegin.

  • The value of hwL2QinQVlanInnerVlanIdBegin ranges from 1 to 4094.

  • The value of hwL2QinQVlanInnerVlanIdEnd must be greater than or equal to the value of hwL2QinQVlanInnerVlanIdBegin.

  • The valid value of hwL2QinQVlan8021pBegin ranges from 0 to 7.

  • The value of hwL2QinQVlan8021pEnd must be greater than or equal to the value of hwL2QinQVlan8021pBegin.

  • The value of hwL2QinQVlanEtherType is 0.

  • Partial deletion is not supported. For example:

    Before deleting a VLAN ID, you must specify hwL2QinQVlanIdBegin and hwL2QinQVlanIdEnd.

Access Restriction

The entries in this table can be read without restriction.

Translation
Download
Updated: 2019-03-29

Document ID: EDOC1000178122

Views: 759358

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next