No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwMstpProNewPortTable

hwMstpProNewPortTable

This table describes the attribute values, attribute description, and access restrictions of ports in each MSTI in an MSTP process.

The indexes of this table are hwMstpProID, hwMstpInstanceID, hwMstpPortId1, hwMstpPortId2, hwMstpPortId3, hwMstpPortId4, and hwMstpPortIdFlag.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.1

hwMstpProNewPortState

INTEGER

{

disabled(1),

discarding(2),

learning(4),

forwarding(5)

}

Read-only

The value of this object identifies the spanning tree status on the port where the MSTI is configured.
  • 1: disabled
  • 2: discarding
  • 4: learning
  • 5: forwarding

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.2

hwMstpProNewPortPriority

INTEGER32 (0..240)

Read-write

The value of this object identifies the priority of the port where the MSTI is configured.

By default, the priority of the port on each MSTI is 128.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.3

hwMstpProNewPortPathCost

INTEGER32 (1..200000000)

Read-write

The value of this object identifies the path cost of the port where the MSTI is configured.

By default, the path cost value of the port on each MSTI is calculated on the basis of the port speed.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.4

hwMstpProNewPortDesignatedRoot

BridgeId

Read-only

This object identifies the specified root bridge of the port where the MSTI is configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.5

hwMstpProNewPortDesignatedCost

INTEGER32

Read-only

The value of this object identifies the specified cost of the port where the MSTI is configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.6

hwMstpProNewPortDesignatedBridge

BridgeId

Read-only

This object indicates the designated bridge of the port where the MSTI is configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.7

hwMstpProNewPortDesignatedPort

OCTET STRING (SIZE (2))

Read-only

This object indicates the designated port of the MSTI.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.8

hwMstpProNewPortStpEdgeport

INTEGER

{

disable(1),

enable(2),

undo(3)

}

Read-write

This object indicates whether the port where the MSTI is configured is the edge port of the STP:

  • disable(1): indicates that the port is an edge port that is in the Disabled state.

  • enable(2): indicates that the port is an edge port that is in the Enabled state.

  • undo(3): indicates that the port is a non-edge port.

By default, all the ports of an MSTP process are configured as non-edge ports.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.9

hwMstpProNewPortStpPointToPoint

INTEGER

{

forceTrue(1),

forceFalse(2),

auto(3)

}

Read-write

The value of this object identifies whether the port where the MSTI is configured is a P2P port.
  • 1: forceTrue
  • 2: forceFalse
  • 3: auto

The default value is auto.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.10

hwMstpProNewPortStpMcheck

INTEGER

{

enable(1),

unused(65535)

}

Read-write

This object indicates whether MCheck is enabled on the port where the MSTI is configured.
  • 1: enable

    When you perform SET operation to this object, the value can be "enable" only.

  • 65535: unused

    When you perform GET operation to this object, the value of this object is "unused".

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.11

hwMstpProNewPortStpTransLimit

Integer32 (0..255)

Read-write

The value of this object identifies the maximum number of times of transmitting a BPDU in a unit time by the spanning tree on the port where the MSTI is configured.

The default value is 147.

When the value of this node is 0, the maximum number of BPDUs that this interface can send each second is as that configured globally.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.12

hwMstpProNewPortStpRXStpBPDU

Counter32

Read-only

This object indicates the number of BPDUs received on the port where the MSTI is configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.13

hwMstpProNewPortStpTXStpBPDU

Counter32

Read-only

This object indicates the number of BPDUs sent on the port where the MSTI is configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.14

hwMstpProNewPortStpRXTCNBPDU

Counter32

Read-only

This object indicates the number of TCN BPDUs received on the port where the MSTI is configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.15

hwMstpProNewPortStpTXTCNBPDU

Counter32

Read-only

This object indicates the number of TCN BPDUs sent on the port where the MSTI is configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.16

hwMstpProNewPortStpRXRSTPBPDU

Counter32

Read-only

This object indicates the number of RSTP BPDUs received on the port where the MSTI is configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.17

hwMstpProNewPortStpTXRSTPBPDU

Counter32

Read-only

This object indicates the number of RSTP BPDUs sent on the port where the MSTI is configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.18

hwMstpProNewPortStpRXMSTPBPDU

Counter32

Read-only

This object indicates the number of MSTP BPDUs received on the port where the MSTI is configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.19

hwMstpProNewPortStpTXMSTPBPDU

Counter32

Read-only

This object indicates the number of MSTP BPDUs sent from the port where the MSTI is configured.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.20

hwMstpProNewPortStpClearStatistics

INTEGER

{

clear(1),

unused(65535)

}

Read-write

This object indicates whether the statistics on the port where the MSTI is configured are cleared.
  • 1: clear

    When you perform SET operation to this object, the value can be "clear" only.

  • 65535: unused

    When you perform GET operation to this object, the value of this object is "unused".

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.21

hwMstpProNewPortStpDefaultPortCost

INTEGER

{

reset(1),

unused(65535)

}

Read-write

The value of this object identifies the default path cost of the port where the MSTI is configured:
  • 1: reset

    When you perform SET operation to this object, the value can be "reset" only.

  • 65535: unused

    When you perform GET operation to this object, the value of this object is "unused".

By default, the path cost value of the port on each MSTI is calculated on the basis of the port speed.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.22

hwMstpProNewPortStpStatus

EnabledStatus

Read-write

The value of this object identifies the spanning tree status on the port where the MSTI is configured.
  • 1: enabled
  • 2: disabled

The default value is enabled(1).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.23

hwMstpProNewPortRootGuard

EnabledStatus

Read-write

The value of this object identifies whether the root guard function is enabled on the port where the MSTI is configured.
  • 1: enabled
  • 2: disabled

By default, the root guard function is disabled. That is, the default value is disabled(2).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.24

hwMstpProNewPortLoopGuard

EnabledStatus

Read-write

The value of this object identifies whether the loop guard function is enabled on the port where the MSTI is configured.
  • 1: enabled
  • 2: disabled

By default, the loop guard function is disabled. That is, the default value is disabled(2).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.25

hwMstpProNewPortCompliance

INTEGER

{

auto(1),

dotls(2),

legacy(3)

}

Read-write

The value of this object identifies the format of MSTP packets transmitted on the port belonging to the MSTP process:
  • 1: auto, which indicates that a device can automatically adjust the supported MSTP packet format.
  • 2: dotls, which indicates MSTP packet format of IEEE 802.1s.
  • 3: legacy, which indicates the Huawei-defined MSTP packet format.
By default, the protocol format of MSTP packets is auto(1).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.26

hwMstpProNewPortConfigDigestSnooping

EnabledStatus

Read-write

The value of this object identifies whether the configuration digest snooping is enabled on the port belonging to the MSTP process:
  • 1: enabled
  • 2: disabled

By default, the configuration digest snooping is enabled. That is, the default value is disabled(2).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.27

hwMstpProNewPortNoAgreementCheck

EnabledStatus

Read-write

The value of this object identifies whether the fast convergence detection is enabled on the interface belonging to the MSTP process. In the scenarios where Huawei devices are interconnected with non-Huawei devices, if the fast convergence detection is enabled, the Agree mark is checked during the fast convergence.
  • 1: enabled
  • 2: disabled

By default, this function is enabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.28

hwMstpProNewPortVplsSubinterfaceEnable

EnabledStatus

Read-write

The value of this object identifies whether a port belonging to the MSTP process notifies its sub-interfaces after receiving a TC BPDU:
  • 1: enabled
  • 2: disabled

By default, this function is disabled. That is, after receiving a TC BPDU, a port belonging to an MSTP process does not notify its sub-interfaces.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.30

hwMstpProNewPortBpduFilter

INTEGER

{

disable(1),

enable(2),

undo(3)

}

Read-write

The value of this object identifies whether the port is enabled to send or receive BPDUs.

  • disable(1): indicates that the function of sending or receiving BPDUs on the port is in the Disabled state.

  • enable(2): indicates that the function of sending or receiving BPDUs on the port is in the Enabled state.

  • undo(3): indicates that the function of sending or receiving BPDUs is disabled on the port.

By default, the function of sending or receiving BPDUs is disabled on ports.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.31

hwMstpProNewPortStpRXTC

Counter32

read-only

The number of TC BPDUs received by the port.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.32

hwMstpProNewPortStpTXTC

Counter32

read-only

The number of TC BPDUs sent by the port.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.4.1.29.1.33

hwMstpProNewPortRole

INTEGER

{

disabled(1),

alternate(2),

backup(3),

root(4),

designated(5),

master(6)

}

Read-only

The value of this object identifies the port role of MSTP process 0.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

hwMstpProNewPortStpEdgeport, hwMstpProNewPortRootGuard, and hwMstpProNewPortLoopGuard are mutually exclusive. That is, a port can play only one of the three roles: the edge port, the designated port, or the root port.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

This table can be read only when there are ports in the MSTP process.

Translation
Download
Updated: 2019-03-29

Document ID: EDOC1000178122

Views: 733744

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next