No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwPimInterfaceTable

hwPimInterfaceTable

This table lists parameters about a PIM interface.

The indexes of this table are hwPimInterfaceIfIndex and hwPimInterfaceIpVersion.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.1

hwPimInterfaceIfIndex

InterfaceIndex

Not-accessible

This object indicates the index of an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.2

hwPimInterfaceIpVersion

InetVersion

Not-accessible

This object indicates the address version of a PIM interface.

The value can be IPv4 or IPv6.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.3

hwPimInterfaceAddressType

InetAddressType

Read-only

This object indicates the address type of an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.4

hwPimInterfaceAddress

InetAddress (SIZE (4..4)) (SIZE (8..8)) (SIZE (16..16)) (SIZE (20..20))

Read-only

This object indicates the IP address of an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.5

hwPimInterfaceGenerationIdValue

Unsigned32

Read-only

This object indicates the GenerationID of an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.6

hwPimInterfaceDr

InetAddress (SIZE (4..4)) (SIZE (8..8)) (SIZE (16..16)) (SIZE (20..20))

Read-only

This object indicates the address of a DR interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.7

hwPimInterfaceDrPriority

Unsigned32

Read-create

This object indicates the DR priority of an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.8

hwPimInterfaceDrPriorityEnabled

TruthValue

Read-only

This object indicates whether this network segment uses the DR Priority option.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.9

hwPimInterfaceHelloInterval

Unsigned32

Read-create

This object indicates the interval for an interface to send PIM Hello packets.

The value ranges from 0 to 18000.

The default value is 30.

Currently, the value range of 1 to 18000 is supported.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.10

hwPimInterfaceTrigHelloInterval

Unsigned32

Read-create

This object indicates the maximum time before this switch sends a triggered PIM Hello message on this interface.

The value range defined in the MIB protocol is 0 to 60.

The default value is 5.

Currently, the value range of 1 to 5 is supported.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.11

hwPimInterfaceHelloHoldtime

Unsigned32

Read-create

This object indicates the holdtime of a PIM neighbor.

The value range defined in the MIB protocol is 0 to 65535 whereas the command line supports 1 to 65535.

The default value is 105.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.12

hwPimInterfaceJoinPruneInterval

Unsigned32

Read-create

This object indicates the interval for a PIM interface to send Join or Prune messages.

The value ranges from 0 to 18000.

The default value is 60.

Currently, the value range of 1 to 18000 is supported.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.13

hwPimInterfaceJoinPruneHoldtime

Unsigned32

Read-create

This object indicates the holdtime field carried in the sent Join or Prune message.

The value range defined in the MIB protocol is 0 to 65535 whereas the command line supports 1 to 65535.

The default value is 210.

Currently, the value range of 1 to 65535 is supported.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.14

hwPimInterfaceDfElectionRobustness

Unsigned32

Read-create

This object indicates the robustness variable for DF election.

The default value is 3.

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.15

hwPimInterfaceLanDelayEnabled

TruthValue

Read-only

This object indicates whether this network segment uses the LanDelay option.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.16

hwPimInterfacePropagationDelay

Unsigned32

Read-create

This object indicates the expected propagation delay between PIM switchs.

The value ranges from 0 to 32767, in milliseconds.

The default value is 500.

Currently, the value range of 1 to 32767 is supported.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.17

hwPimInterfaceOverrideInterval

Unsigned32

Read-create

This object indicates the interval for overriding a prune.

The value ranges from 0 to 65535.

The default value is 2500.

Currently, the maximum access is read-write, and the value range of 1 to 65535 is supported.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.18

hwPimInterfaceEffectPropagDelay

Unsigned32

Read-only

This object indicates the negotiated value of the LanDelay on an interface.

The value ranges from 0 to 32767.

Currently, the value range of 1 to 32767 is supported.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.19

hwPimInterfaceEffectOverrideIvl

Unsigned32

Read-only

This object indicates the negotiated override interval on this network segment.

The value ranges from 0 to 65535.

Currently, the value range of 1 to 65535 is supported.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.20

hwPimInterfaceSuppressionEnabled

TruthValue

Read-only

This object indicates whether Join suppression is enabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.21

hwPimInterfaceBidirCapable

TruthValue

Read-only

This object indicates whether bidirectional PIM is enabled.

Currently, the return value 0 is supported only.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.22

hwPimInterfaceDomainBorder

TruthValue

Read-create

This object indicates whether this interface is a PIM domain border.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.23

hwPimInterfaceStubInterface

TruthValue

Read-create

This object indicates whether PIM Silent is enabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.24

hwPimInterfacePruneLimitInterval

Unsigned32

Read-create

This object indicates the value of PruneLimitTimer on an interface. It is applicable only to PIM-DM.

The value ranges from 0 to 65535.

The default value is 60.

Currently, the maximum access is read-only; the return value 210 is supported only.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.25

hwPimInterfaceGraftRetryInterval

Unsigned32

Read-create

This object indicates the interval for retransmitting Graft messages.

The value ranges from 0 to 65535

The default value is 3.

Currently, the maximum access is read-write.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.26

hwPimInterfaceSrPriorityEnabled

TruthValue

Read-only

This object indicates whether state refresh is enabled on an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.27

hwPimInterfaceStatus

RowStatus

Read-create

This object indicates the row status.

  • Active
  • Create and Go
  • Destroy

Currently, CreateAndGo and Destroy are supported.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.28

hwPimInterfaceStorageType

StorageType

Read-create

This object indicates the storage type of objects.

Currently, only the value nonVolatile is returned.

Currently, Permanent is not supported.

1.3.6.1.4.1.2011.5.25.149.4.1.1.1.29

hwPimInterfaceName

DisplayString (SIZE (1..64))

Accessible-for-notify

This object indicates the name of the interface.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

This table supports only CreateAndGo. You must set hwPimInterfaceIfIndex and hwPimInterfaceIpVersion together to succeed in creating a row.

Modification Restriction

The value rang of hwPimInterfaceTrigHelloInterval defined in the MIB is 0 to 60 but the command line supports only 1 to 5. Therefore, if you input a value larger than 5 in the command line, the setting fails and an error code is returned.

The minimum values that can be set for the object, hwPimInterfaceHelloInterval, hwPimInterfaceTrigHelloInterval, hwPimInterfacePropagationDelay, hwPimInterfaceHelloHoldtime, hwPimInterfaceJoinPruneInterval, hwPimInterfaceJoinPruneHoldtime, hwPimInterfacePropagationDelay, hwPimInterfaceOverrideInterval, hwPimInterfaceEffectPropagDelay, hwPimInterfaceEffectOverrideIvl, and hwPimInterfaceGraftRetryInterval, are all 0 but the command line supports the minimum values to be 1. Therefore, if you input a value smaller than 1 in the command line, the setting fails and an error code is returned.

Deletion Restriction

The entries in this table can be deleted without restriction.

Access Restriction

The entries in this table can be read only when multicast is enabled and the interface enabled with PIM exists.

The value ranges of hwPimInterfaceHelloInterval and hwPimInterfaceJoinPruneInterval defined in the MIB are both 0 to 18000 but the command line supports only 1 to 2147483647. Therefore, if the value read from the command line is greater than the maximum value defined in the MIB, the value 18000 is read.

Translation
Download
Updated: 2019-03-29

Document ID: EDOC1000178122

Views: 762018

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next