No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Functions Overview

Functions Overview

Kompella uses the Border Gateway Protocol (BGP) as the signaling protocol to transmit Layer 2 information and VC labels. Kompella implements the Layer 2 virtual private network (L2VPN) in end-to-end (CE to CE) mode in the multi-protocol label switching (MPLS) network.

HUAWEI-KOMPELLA-MIB is used to query various settings and statistics in L2VPN Kompella mode. The MIB can be used to query VPN configuration, VPN target configuration, connected CE configuration, VC configuration, VE tunnel, VC statistics, VC Up, VC Down, the switchover between active and standby PWs, or the trap message sent when a VC is deleted. The entries in this MIB cannot be set.

The OID of the root object is as follows:

iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).huawei(2011).huaweiMgmt(5).hwDatacomm(25).hwL2Vpn(119).hwL2VpnKompella(2)

Translation
Download
Updated: 2019-03-29

Document ID: EDOC1000178122

Views: 753514

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next