No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
ospfIfTable

ospfIfTable

This table is about the OSPF interfaces from the viewpoint of OSPF.

The indexes of this table are ospfIfIpAddress and ospfAddressLessIf.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.14.7.1.1

ospfIfIpAddress

IpAddress

Read-only

The IP address of this OSPF interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.7.1.2

ospfAddressLessIf

InterfaceIndexOrZero

Read-only

For the purpose of easing the instancing of addressed and addressless interfaces; this variable takes the value 0 on interfaces with IP addresses and the corresponding value of ifIndex for interfaces having no IP address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.7.1.3

ospfIfAreaId

AreaID

Read-create

A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0.0.0.0 is used for the OSPF backbone.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.7.1.4

ospfIfType

INTEGER{broadcast (1),nbma (2),pointToPoint (3),pointToMultipoint (5)}

Read-create

The OSPF interface type. By way of a default, this field may be intuited from the corresponding value of ifType. Broadcast LANs, such as Ethernet and IEEE 802.5, take the value 'broadcast', X.25 and similar technologies take the value 'nbma', and links that are definitively point to point take the value 'pointToPoint'.Value range:
  • 1: Broadcast
  • 2: nbma
  • 3: Point to Point
  • 5: Point to Multipoint

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.7.1.5

ospfIfAdminStat

Status

Read-create

The OSPF interface's administrative status. The value formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPF.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.7.1.6

ospfIfRtrPriority

DesignatedRouterPriority

Read-create

The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the device is not eligible to become the designated router on this particular network. In the event of a tie in this value, devices will use their Router ID as a tie breaker. Value range: (0, 255)The default value is 1.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.7.1.7

ospfIfTransitDelay

UpToMaxAge

Read-create

The estimated number of seconds it takes to transmit a link state update packet over this interface. The default value is 1.

Currently, the maximum access is read-only; the value ranges from 1 to 500.

1.3.6.1.2.1.14.7.1.8

ospfIfRetransInterval

UpToMaxAge

Read-create

The number of seconds between link state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and Link State request packets. The default value is 5.

Currently, the maximum access is read-only; the value ranges from 1 to 3600.

1.3.6.1.2.1.14.7.1.9

ospfIfHelloInterval

HelloRange

Read-create

The length of time, in seconds, between the Hello packets that the device sends on the interface. This value must be the same for all devices attached to a common network. The default value is 10.

Currently, the maximum access is read-only; the value ranges from 1 to 65535.

1.3.6.1.2.1.14.7.1.10

ospfIfRtrDeadInterval

PositiveInteger

Read-create

The number of seconds that a device's Hello packets have not been seen before its neighbors declare the device down. The value is a multiple of the Hello interval, and the default multiple is 4. This value must be the same for all devices attached to a common network. Value range: (1, 23592600)

Currently, the maximum access is read-only; the value ranges from 1 to 235926000.

1.3.6.1.2.1.14.7.1.11

ospfIfPollInterval

PositiveInteger

Read-create

The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi-access neighbor. The default value is 120.

Currently, the maximum access is read-only; the value ranges from 1 to 3600.

1.3.6.1.2.1.14.7.1.12

ospfIfState

INTEGER{down (1), loopback (2),waiting (3),pointToPoint (4),designatedRouter (5),backupDesignatedRouter (6),otherDesignatedRouter (7)}

Read-only

The OSPF Interface State.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.7.1.13

ospfIfDesignatedRouter

IpAddress

Read-only

The IP address of the designated router.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.7.1.14

ospfIfBackupDesignatedRouter

IpAddress

Read-only

The IP address of the backup designated router.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.7.1.15

ospfIfEvents

Counter32

Read-only

The number of times this OSPF interface has changed its state or an error has occurred.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.7.1.16

ospfIfAuthKey

OCTET STRING (SIZE (0..256))

Read-create

The cleartext password used as an OSPF authentication key when simplePassword security is enabled. If the key length is shorter than 8 octets, the agent will left adjust and zero fill to 8 octets. Unauthenticated interfaces need no authentication key, and simple password authentication cannot use a key of more than 8 octets. When read, ospfIfAuthKey always returns an octet string of length zero.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.7.1.17

ospfIfStatus

RowStatus

Read-create

This object permits management of the table by facilitating actions such as row creation, construction, and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.7.1.18

ospfIfMulticastForwarding

INTEGER{blocked (1),multicast (2),unicast (3)}

Read-create

The way multicasts should be forwarded on this interface: not forwarded, forwarded as data link multicasts, or forwarded as data link unicasts. Data link multicasting is not meaningful on point-to-point and NBMA interfaces, and setting ospfMulticastForwarding to 0 effectively disables all multicast forwarding. The default value is blocked.

Currently, the maximum access is read-only; the return value 1 is supported only.

1.3.6.1.2.1.14.7.1.19

ospfIfDemand

TruthValue

Read-create

Indicates whether Demand OSPF procedures should be performed on this interface.

Currently, the maximum access is read-only; the return value 1 is supported only.

1.3.6.1.2.1.14.7.1.20

ospfIfAuthType

OspfAuthenticationType

Read-create

The authentication type specified for an interface. Note that this object can be used to engage in significant attacks against an OSPF device.

Currently, the maximum access is read-only.

1.3.6.1.2.1.14.7.1.21

ospfIfLsaCount

Gauge32

Read-only

The total number of link-local link state advertisements in this interface's link-local link state database.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.7.1.22

ospfIfLsaCksumSum

Unsigned32

Read-only

The 32-bit unsigned sum of the Link State Advertisements' LS checksums contained in this interface's link-local link state database. The sum can be used to determine if there has been a change in the interface's link state database and to compare the interface link state database of devices attached to the same subnet.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.7.1.23

ospfIfDesignatedRouterId

RouterID

Read-only

The Router ID of the designated router.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.14.7.1.24

ospfIfBackupDesignatedRouterId

RouterID

Read-only

The Router ID of the backup designated router.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The entries in this table cannot be created.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

Before reading this MIB table, run the ospf mib-binding process-id command to bind the OSPF process to SNMP.

Translation
Download
Updated: 2019-03-29

Document ID: EDOC1000178122

Views: 729854

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next