No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
Querying NQA Information

Querying NQA Information

NOTE:

In this example, ICMP test result is queried.

You can query the results of different test instances by using the indexes of the nqaAdminCtrlTable and nqaResultsTable.

  • nqaAdminCtrlTable describes the configuration of NQA test instances.

  • nqaResultsTable describes the results of NQA test instances, including success and failure information, number of sent packets, number of lost packets, and packet loss ratio.

Table 3-15  Objects in NQA information query
MIB Table MIB Object MIB OID
nqaAdminCtrlTable nqaAdminCtrlOwnerIndex 1.3.6.1.4.1.2011.5.25.111.2.1.1.1
nqaAdminCtrlTestName 1.3.6.1.4.1.2011.5.25.111.2.1.1.2
nqaResultsTable nqaResultsIndex 1.3.6.1.4.1.2011.5.25.111.4.1.1.1
nqaResultsHopIndex 1.3.6.1.4.1.2011.5.25.111.4.1.1.2

Displaying NQA Test Instance Results

Search for the result of the corresponding test instance by using nqaAdminCtrlOwnerIndex and nqaAdminCtrlTestName, and then search for the result of the specified test instance by using nqaResultsIndex and nqaResultsHopIndex.

  1. nqaAdminCtrlTable describes the configuration of NQA test instances. Figure 3-122 shows the NQA test instance information. The combination of nqaAdminCtrlOwnerIndex and nqaAdminCtrlTestName of test instance icmp01 is 5.97.100.109.105.110.4.105.99.109.112.
    Figure 3-122  Test instance information
  2. nqaResultsTable describes the running results of NQA test instances. Figure 3-123 shows the NQA test instance running results. The combination of nqaAdminCtrlOwnerIndex and nqaAdminCtrlTestName of test instance icmp01 is 5.97.100.109.105.110.4.105.99.109.112, and the combination of nqaResultsIndex and nqaResultsHopIndex is 1.1.
    Figure 3-123  Test instance running results
Translation
Download
Updated: 2019-03-29

Document ID: EDOC1000178122

Views: 688337

Downloads: 34

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next