No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwAclUserRuleTable

hwAclUserRuleTable

This table is used to create rules in a user ACL rule group.

This table uses the index of hwAclNumGroupTable together with an object with the increasing value, that is, rule ID, as its index.

The indexes of this table are hwAclUserAclNum and hwAclUserSubitem.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.1.1.7.1.1

hwAclUserAclNum

Integer32 (6000..9999 )

Read-only

The value of this object identifies the primary index.

It corresponds to the index of hwAclNumGroupTable, indicating the rule group number.

The value of the primary index ranges from 6000 to 9999.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.7.1.2

hwAclUserSubitem

Unsigned int32

Read-only

The value of this object identifies the secondary index.

It refers to the rule ID in the rule group.

The value ranges from 0 to 4294967294.

If the rule corresponding to the rule ID exists, the new rule overwrites the old one. This operation equals modifying an existent ACL rule.

If the rule corresponding to the rule ID does not exist, a new rule is created and inserted based on the order of the rule ID.

If no rule ID is specified, the system automatically assigns one when you create a rule.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.7.1.3

hwAclUserAct

INTEGER

{

permit(1),

deny(2)

}

Read-create

The value of this object identifies the action of an ACL rule.

The value can be:

  • permit(1): permits the packets that match the rule
  • deny(2): discards the packets that match the rule

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.7.1.4

hwAclUserProtocol

Integer32 (0..255)

Read-create

The object indicates the protocol type of a rule. It specifies the protocol type over IP.

The value ranges from 0 to 255. The value 0 indicates any types of IP packets.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.7.1.5

hwAclUserSrcIp

IpAddress

Read-create

The value of this object identifies the source IP address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.7.1.6

hwAclUserSrcWild

IpAddress

Read-create

The value of this object identifies the wildcard mask of the source IP address.

The value ranges from 0.0.0.0 to 255.255.255.255.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.7.1.7

hwAclUserSrcOp

Integer32

Read-create

The value of this object identifies the operation characters on the source interface.

  • 1: lt(1)
  • 2: eq(2)
  • 3: gt(3)
  • 4: neq(4)
  • 5: invalid(0)
  • 6: range(5)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.7.1.8

hwAclUserSrcPort1

Integer32 (0..65535)

Read-create

The value of this object identifies the lower limit of the source port number.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.7.1.9

hwAclUserSrcPort2

Integer32 (0..65535)

Read-create

The value of this object identifies the upper limit of the source port number.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.7.1.10

hwAclUserDestIp

IpAddress

Read-create

The value of this object indicates the destination IP address.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.7.1.11

hwAclUserDestWild

IpAddress

Read-create

The value of this object indicates the wildcard mask of the destination IP address. The value ranges from 0.0.0.0 to 255.255.255.255.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.7.1.12

hwAclUserDestOp

Integer32

Read-create

The value of this object identifies the operation characters on the destination interface.

  • 1: lt(1)
  • 2: eq(2)
  • 3: gt(3)
  • 4: neq(4)
  • 5: invalid(0)
  • 6: range(5)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.7.1.13

hwAclUserDestPort1

Integer32 (0..65535)

Read-create

The value of this object identifies the lower limit of the destination port number.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.7.1.14

hwAclUserDestPort2

Integer32 (0..65535)

Read-create

The value of this object identifies the upper limit of the destination port number.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.7.1.19

hwAclUserTimeRangeIndex

Integer32 (0..256)

Read-create

The value of this object identifies the index of a time range during which an ACL rule can be applied.

The value ranges from 0 to 256. The value 0 declares that the ACL rule has no time range.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.7.1.20

hwAclUserIcmpType

Integer32 (0..255 | 65535)

Read-create

The value of this object identifies the ICMP message type.

The value ranges from 0 to 255. The value 65535 is invalid.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.7.1.21

hwAclUserIcmpCode

Integer32 (0..255 | 65535)

Read-create

The value of this object identifies the ICMP code.

The value ranges from 0 to 255. The value 65535 is invalid.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.7.1.24

hwAclUserEnable

TruthValue

Read-only

This object indicates whether the ACL rule takes effect currently

This object is Read-only.

The value can be:
  • true(1)
  • false(2)

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.7.1.26

hwAclUserVrfName

OCTET STRING

Read-create

This object indicates the VPN instance name specified in a user ACL.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.7.1.27

hwAclUserSrcUserGroupName

OCTET STRING

Read-create

This object indicates the source user resource group name. The value is a string of 0-32 characters.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.7.1.28

hwAclUserDestUserGroupName

OCTET STRING

Read-create

This object indicates the destination user resource group name. The value is a string of 0-32 characters.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.7.1.31

hwAclUserRowStatus

RowStatus

Read-create

This object indicates the status of the rows.

Currently, CreateAndGo, Active and Destroy are implemented.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.7.1.33

hwAclUserSrcUserGroupNum

Integer32

Read-create

This object indicates the source resource group number range.
  1. 0-64000
  2. 65535

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.1.1.7.1.34

hwAclUserDestUserGroupNum

Integer32

Read-create

This object indicates the destination resource group number range.
  1. 0-64000
  2. 65535

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

  • Before you create an ACL rule, the primary index must have a corresponding value in hwAclNumGroupTable.

  • When you create an ACL rule, hwAclUserAct is necessarily configured.

  • When you specify the index of a time range during which an ACL rule can be applied, the time range that the index corresponds to must exist; otherwise, creating an ACL rule fails.

  • You need to specify the row status CreateAndGo of hwAclUserRowStatus.

Modification Restriction

The following entries in this table cannot be modified after created:

hwAclUserAct, hwAclUserProtocol, hwAclUserSrcIp, hwAclUserSrcWild, hwAclUserSrcOp, hwAclUserSrcPort1, hwAclUserSrcPort2, hwAclUserDestIp, hwAclUserDestWild, hwAclUserDestOp, hwAclUserDestPort1, hwAclUserDestPort2, hwAclUserTimeRangeIndex, hwAclUserIcmpType, hwAclUserIcmpCode, hwAclUserSrcUserGroupName, hwAclUserDestUserGroupName, hwAclUserSrcUserGroupNum, hwAclUserDestUserGroupNum.

Deletion Restriction

You need to specify the row status destroy.

Access Restriction

The entries in this table have values only when the entries in hwAclNumGroupTable have values.

Translation
Download
Updated: 2019-03-29

Document ID: EDOC1000178122

Views: 756976

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next