No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwDHCPRSeletAllocateModeTable

hwDHCPRSeletAllocateModeTable

This table describes the allocation modes of DHCP services.

The index of this table is ifIndex.

OID

Object

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.7.1.1.2.1.1

hwDHCPRSelectAllocateMode

INTEGER{global(0), interface(1), relay(2)}

INTEGER{global(0), interface(1), relay(2), none(3), globalAndRelay(4), interfaceAndRelay(5)}

Read-write

The value of this object identifies the address allocation mode of the DHCP server.

The values are as follows:

  • global(0): indicates that the DHCP server allocates addresses based on a global address pool.
  • interface(1): indicates that the DHCP server allocates addresses based on an interface address pool.
  • relay(2): indicates that the DHCP server allocates addresses through a DHCP relay.
  • none(3): indicates that no allocation mode is configured for the DHCP server.
  • globalAndRelay(4): indicates that the DHCP server allocates IP addresses from a global address pool. If IP addresses cannot be allocated from the global address pool, the DHCP relay agent relays requests of DHCP clients to the DHCP server.
  • interfaceAndRelay(5): indicates that the DHCP server allocates IP addresses from an interface address pool. If this fails, the request is relayed to the DHCP server and the DHCP server will allocate addresses.

Only global(0), interface(1) and relay(2) are supported.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The allocation mode of IP addresses can be selected. The interface mode is available only when the IP address is assigned for the interface.

Deletion Restriction

The entries in this table can be deleted only when hwDHCPRSelectAllocateMode is set to none(3).

Access Restriction

None.

Translation
Download
Updated: 2019-03-29

Document ID: EDOC1000178122

Views: 764455

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next