No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
HUAWEI-L2VLAN-MIB

HUAWEI-L2VLAN-MIB

Functions Overview

Huawei defines HUAWEI-L2VLAN-MIB. This MIB is used to set the information such as the basic information of the VLAN and the relationship between the VLAN and ports. This MIB supports the following functions:

  • Querying the status of the VLAN

  • Encapsulating with the layer 2 tag on the QinQ port

  • Setting and modifying VLAN replacement

  • Setting and modifying the super-VLAN

  • Setting port isolation

The OID of root objects is:

iso(1).org(3).dod(6).internet(1).private(4).enterprises(1).huawei(2011).huaweiMgmt(5).hwDatacomm(25).hwL2Mgmt(42).hwL2Vlan(3)

NOTE:

The dynamic VLAN does not support the operation by using a MIB.

Relationship Between Tables

Figure 70-1 shows the relationship between the hwL2VlanMIBTable, hwL2VlanStackingTable, hwL2VlanMappingTable, and hwSuperVlanTable. The VLAN IDs of the indexes in the tables must be created VLAN index values.

Description of Single Objects

hwVcmpDeviceMac

OID

Node Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.42.3.1.5.1

hwVcmpDeviceMac

OCTET STRING{(6,6)}

read-write

MAC address of a device running VCMP.

This object is implemented as defined in the corresponding MIB file.

hwL2VlanVoiceVlan8021p

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.42.3.1.2.38

hwL2VlanVoiceVlan8021p

Integer(0..7)

Read-write

This object indicates the 802.1p priority of the Voice VLAN.

The default value is 6.

This object is implemented as defined in the corresponding MIB files.

hwL2VlanVoiceVlanDscp

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.42.3.1.2.39

hwL2VlanVoiceVlanDscp

Integer(0..63)

Read-write

This object indicates DSCP priority of the Voice VLAN.

The default value is 46.

This object is implemented as defined in the corresponding MIB files.

Description of MIB Tables

hwL2VlanMIBTable

This table is the VLAN status information table. It describes the information of the VLAN, such as the type, port list, and current status.

The index of this table is hwL2VlanIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.1

hwL2VlanIndex

VlanId

Not-accessible

The value of this object identifies the VLAN index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.2

hwL2VlanDescr

OCTET STRING(SIZE(0 to 80))

Read-create

This object indicates the description information of the VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.3

hwL2VlanPortList

PortList

Read-create

This object indicates the list of ports added to the VLAN.

A switch interface joins VLANs 1 to 4094 by default.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.4

hwL2VlanType

INTEGER

{

super vlan(1),

common-vlan(2),

sub-vlan(3),

muxVlan(4),

muxSubVlan(5),

protocolTransVlan(6)

}

Read-create

The value of this object identifies the type of the VLAN.

NOTE:
super vlan(1), common-vlan(2), and sub-vlan(3) are implemented as defined in the corresponding MIB files. However, sub-vlan(3), muxSubVlan(5), and protocolTransVlan(6) can be only read-only.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.6

hwL2VlanIfIndex

Integer32

Read-only

This object indicates whether the VLAN is configured with VLANIF. If VLANIF is configured, the value of this object is the index of VLANIF. Otherwise, the value is -1.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.7

hwL2VlanMacLearn

EnabledStatus

Read-create

The value of this object identifies whether the function of learning the MAC address is enabled. Super VLANs do not have this attribute.

  • enabled(1)
  • disabled(2)

The default value is enabled(1).

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.11

hwL2VlanCreateStatus

INTEGER

{

other(1),

static(2),

dynamic(3)

}

Read-only

The value of this object identifies the creation mode of the VLAN:

  • other(1)
  • static(2)
  • dynamic(3)

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.12

hwL2VlanRowStatus

RowStatus

Read-create

The value of this object identifies the statuses of rows recorded by the VLAN:

  • active(1)
  • notInService(2)
  • notReady(3)
  • createAndGo(4)
  • createAndWait(5)
  • destroy(6)

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.15

hwL2VlanProperty

INTEGER

{

default(1),

backboneVlan(2),

mutilcastVlan(3),

userVlan(4)

}

Read-only

The Property of Vlan: backboneVlan(2) used by PBT application, mutilcastVlan(3) used by Mutilcast Vlan, userVlan(4) used by the users VLAN, and Default(1) means no special apply.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.17

hwL2VlanName

OCTET STRING(SIZE(0..31))

Read-create

The value of this object indicates the name of VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.18

hwL2VlanSmartMacLearn

EnabledStatus

Read-create

The value indicates whether the MAC address learning is enabled.
  • enabled(1): enabled

  • disable(2): disabled

After the flexible MAC address learning in a VLAN is enabled, if fewer than three interfaces in the VLAN are Up, the system automatically disables MAC address learning in the VLAN, avoiding unnecessary resource consumption due to MAC address learning.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.20

hwL2VlanManagementVlan

EnabledStatus

Read-create

The value of this object indicates whether the VLAN is a management VLAN.
  • enabled(1): yes
  • disabled(2): no

Currently, the maximum access is read-only.

1.3.6.1.4.1.2011.5.25.42.3.1.1.1.1.21

hwL2VlanDynamicVlan

EnabledStatus

read-only

The value of this object indicates whether the VLAN is a dynamic VLAN.
  • enabled(1): yes
  • disabled(2): no

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The record of the unused VLAN with the index from 1 to 4094 can be created in the table.

Modification Restriction

In case that no port is associated with the common VLAN, you can set the common VLAN to the super-VLAN.

After you set the super-VLAN to the common VLAN, the type of all related sub-VLANs is automatically changed to the common VLAN.

The super-VLAN and sub-VLAN cannot be changed to each other.

Deletion Restriction

The record in this table can be deleted. After the super-VLAN is deleted, the association with all related sub-VLANs is deleted. The type of the sub-VLANs is changed to common VLAN.

Access Restriction

None.

hwL2VlanStackingTable

This table is a configuration table for double tags. It describes the function of encapsulating the incoming packet from the VLAN stacking port with the double tags.

The index of this table is hwL2VlanStackingPortIndex.hwL2VlanStackingInsideVlanId.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1.1

hwL2VlanStackingPortIndex

Integer(1 to 65535)

Not-accessible

The value of this object identifies the index of the VLAN stacking port.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1.2

hwL2VlanStackingInsideVlanId

VlanId

Not-accessible

The value of this object identifies the VLAN ID. It identifies the inner tag for encapsulating the incoming packet from the VLAN stacking port.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1.3

hwL2VlanStackingOutsideVlanListLow

OCTET STRING(SIZE(256))

Read-create

This object is the low 2048 bits in the VLAN list. It identifies the outer tag of the incoming packet. Each bit corresponds to one VLAN ID.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1.4

hwL2VlanStackingOutsideVlanListHigh

OCTET STRING(SIZE(256))

Read-create

This object is the high 2048 bits in the VLAN list. It identifies the outer tag of the incoming packet. Each bit corresponds to one VLAN ID.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.1.1.5

hwL2VlanStackingRowStatus

RowStatus

Read-create

The value of this object identifies the statuses of rows in the hwL2VlanStackingTable.

  • active(1)
  • notInService(2)
  • notReady(3)
  • createAndGo(4)
  • createAndWait(5)
  • destroy(6)

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The entries in this table can be created. When you create a record in the table, the port must be a Layer 2 port. The VLAN must be created and cannot be a super-VLAN.

Modification Restriction

In this table, the VLAN lists can be modified. The low 2048 bits and the high 2048 bits of the VLAN lists are the character strings with 256 bytes. Eight bits of each byte in the character string correspond to eight VLAN IDs. Therefore, the low 2048 bits and high 2048 bits of the VLAN list correspond to 4096 VLAN IDs.

The first bit and the 4096th bit respectively correspond to VLAN 0 and VLAN 4095. Other bits are in one-to-one corresponding to other VLAN IDs. VLAN 0 and VLAN 4095 are reserved; therefore, these two bits are fixedly 0 and cannot be modified.

Deletion Restriction

None.

Access Restriction

None.

hwL2VlanMappingTable

This table is the table of the replacement configuration on the VLAN mapping port. It describes the VLAN mappings on the VLAN mapping port.

The index of this table is hwL2VlanMappingPortIndex.hwL2VlanMappingInsideVlanId.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1.1

hwL2VlanMappingPortIndex

Integer(1 to 65535)

Not-accessible

The value of this object identifies the index of the VLAN mapping port.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1.2

hwL2VlanMappingInsideVlanId

VlanId

Not-accessible

The value of this object identifies the VLAN ID. It describes the VLAN ID after replacement.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1.3

hwL2VlanMappingOutsideVlanListLow

OCTET STRING(SIZE(256))

Read-create

This object indicates the low 2048 bits of the VLAN list. It identifies the VLAN list to be replaced. Each bit corresponds to one VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1.4

hwL2VlanMappingOutsideVlanListHigh

OCTET STRING(SIZE(256))

Read-create

This object indicates the high 2048 bits of the VLAN list. It identifies the VLAN list to be replaced. Each bit corresponds to one VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.2.1.5

hwL2VlanMappingRowStatus

RowStatus

Read-create

The value of this object identifies the statuses of rows in hwL2VlanMappingTable.

  • active(1)
  • notInService(2)
  • notReady(3)
  • createAndGo(4)
  • createAndWait(5)
  • destroy(6)

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The entries in this table can be created. When you create a record in the table, the port must be a Layer 2 port. The VLAN must be created and cannot be a super-VLAN.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

None.

Access Restriction

None.

hwSuperVlanTable

This table is the super-VLAN table. It describes the information of the sub-VLANs in the super-VLAN.

The index of this table is hwSuperVlanId.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.42.3.1.2.3.1.1

hwSuperVlanId

VlanId

Not-accessible

The value of this object identifies the super-VLAN index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.3.1.2

hwSubVlanListLow

OCTET STRING(SIZE(256))

Read-write

This object indicates the low 2048 bits of the VLAN list. It identifies the sub-VLANs of the super-VLAN. Each bit corresponds to one VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.3.1.3

hwSubVlanListHigh

OCTET STRING(SIZE(256))

Read-write

This object indicates the high 2048 bits of the VLAN list. It identifies the sub-VLANs of the super-VLAN. Each bit corresponds to one VLAN.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The entries in this table cannot be created.

Modification Restriction

In this table, the VLAN list can be modified. The values of the low 2048 VLAN list and high 2048 VLAN list are the character strings with 256 bytes. Eight bits of each byte in the character string correspond to eight VLAN IDs. Therefore, the low 2048 bits and high 2048 bits of the VLAN list correspond to 4096 VLAN IDs.

The first bit and the 4096th bit respectively correspond to VLAN 0 and VLAN 4095. Other bits are in one-to-one corresponding to other VLAN IDs. VLAN 0 and VLAN 4095 are reserved; therefore, these two bits are fixedly 0 and cannot be modified.

When the VLAN must exist and must be a common VLAN, the corresponding bit can be set to 1. That is, the VLAN is successfully set to the sub-VLAN of the super-VLAN.

Deletion Restriction

The record in this table cannot be deleted.

Access Restriction

None.

hwL2UntagAddDTagTable

This table is used to add double VLAN tags to untagged packets.

The index of this table is hwL2UntagAddDTagPortIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.42.3.1.2.37.1.1

hwL2UntagAddDTagPortIndex

Integer

Not-accessible

This object indicates the index of an interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.37.1.2

hwL2UntagAddDTagOuterVlanId

VlanId

Read-create

This object indicates the outer VLAN tag added to an untagged packet.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.37.1.3

hwL2UntagAddDTagInnerVlanId

VlanId

Read-create

This object indicates the inner VLAN tag added to an untagged packet.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.37.1.4

hwL2UntagAddDTagRowStatus

RowStatus

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

  • The link type of the interface cannot be dot1q-tunnel.

  • The VLAN corresponding to the outer VLAN tag cannot be a control VLAN of the Rapid Ring Protection Protocol (RRPP).

  • The VLAN corresponding to the outer VLAN tag cannot be a control VLAN of Smart Ethernet Protection (SEP).

  • The VLAN corresponding to the outer VLAN tag cannot be a control VLAN of Ethernet Ring Protection Switching (ERPS).

  • The inner and outer VLAN tags on an interface cannot have been used for 2-to-1 VLAN mapping or 2-to-2 VLAN mapping.

  • The inner and outer VLAN tags on an interface cannot have been used for VLAN Switch.

  • The inner and outer VLAN tags on an interface cannot have been used for MAC-VLAN, IP-SUBNET-VLAN, PROTOCOL-VLAN, or POLICY-VLAN.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwL2VlanIpSubnetVlanTable

This table is used to configure the IP subnet-based VLAN.

The indexes of this table are hwL2VlanIpSubnetVlanVlanId and hwL2VlanIpSubnetVlanIpSubnetIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.1

hwL2VlanIpSubnetVlanVlanId

VlanId

Not-accessible

This object specifies the VLAN ID.

The value ranges from 1 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.2

hwL2VlanIpSubnetVlanIpSubnetIndex

Integer(1..12)

Not-accessible

This object indicates the index of the IP subnet.

The value ranges from 1 to 12.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.3

hwL2VlanIpSubnetVlanIpAddress

IpAddress

Read-create

This object specifies the source IP address or source network address that is the basis of the subnet-based VLANs.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.4

hwL2VlanIpSubnetVlanIpSubnetMask

IpAddress

Read-create

This object indicates the subnet mask.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.5

hwL2VlanIpSubnetVlanPriority

Integer(0..7)

Read-create

This object specifies the 802.1p priority of the VLAN corresponding to the specified IP address or network segment.

The value ranges from 0 to 7.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.18.1.6

hwL2VlanIpSubnetVlanRowStatus

RowStatus

Read-create

This object identifies the row status.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The entries can be created in this table.

The subnet-based VLANs are divided based on the source IP addresses and subnet masks in the packets. After receiving untagged packets through an interface, a device determines the VLANs to which the packets belong according to their source addresses before sending them to corresponding VLANs. This feature is used to send the packets from the specified network segment or IP address over the specified VLAN.

The entire equipment can be configured with 256 sub-VLANs and each VLAN can be configured with 12 sub-VLANs.

Modification Restriction

The entries in this table can be modified. Only the priorities can be modified.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The entries in this table can be read without restraint.

hwL2VlanMacVlanNewTable

This table is used to implement MAC-based VLANs.

The index of this table is hwL2VlanMacVlanNewMac.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.42.3.1.2.28.1.1

hwL2VlanMacVlanNewMac

MacAddress

Not-accessible

This object indicates the MAC address that is the basis of dividing VLANs.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.28.1.2

hwL2VlanMacVlanNewVlanId

VlanId

Read-create

This object specifies the VLAN ID.

The value ranges from 1 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.28.1.3

hwL2VlanMacVlanNewVlanPriority

Integer32(0..7)

Read-create

This object identifies the 802.1p priority of the VLAN matching the MAC address.

The value ranges from 0 to 7.

The default value is 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.28.1.4

hwL2VlanMacVlanNewMacRowStatus

RowStatus

Read-create

This object identifies the row status.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The entries in this table can be created only when the MAC address mask is all Fs.

MAC-address-based VLANs are classified according to the source MAC addresses of packets. After receiving untagged packets through an interface, a device determines the VLANs to which the packets belong according to their source addresses before sending them to corresponding VLANs. This feature is used to send packets with specified source MAC addresses to specified VLANs.

Modification Restriction

The entries in this table can be modified only when the MAC address mask is all Fs, and only the priority can be modified.

Deletion Restriction

The entries in this table can be deleted only when the MAC address mask is all Fs.

Access Restriction

The entries in this table can be read only when the MAC address mask is all Fs.

hwL2VlanProtocolVlanNewTable

This table is used to configure the protocol-based VLANs.

The indexes of this table are hwL2VlanProtocolVlanNewVlanId and hwL2VlanProtocolVlanNewProtocolIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.1

hwL2VlanProtocolVlanNewVlanId

VlanId

Not-accessible

This object specifies the VLAN ID set in the system view.

The value ranges from 1 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.2

hwL2VlanProtocolVlanNewProtocolIndex

Integer32(0..15)

Not-accessible

This object identifies the index of the protocol-based VLAN.

The value ranges from 0 to 15.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.3

hwL2VlanProtocolVlanNewProtocolType

INTEGER

{

at(1),

ipv4(2),

ipv6(3),

ipxEthernetii(4),

ipxLlc(5),

ipxRaw(6),

ipxSnap(7),

modeEthernetii(8),

modeLlc(9),

modeSnap(10)

}

Read-create

This object indicates the protocol type.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.4

hwL2VlanProtocolVlanNewProtocolTypeValue

OCTET STRING (SIZE(2))

Read-create

The value of the configured protocol type.

The relationship among hwL2VlanProtocolVlanNewProtocolType and hwL2VlanProtocolVlanNewProtocolTypeValue is as follows.

  • ProtocolType: ipv4
    • ProtocolSubType: notused
    • ProtocolTypeValue: Zero length string
  • ProtocolType: ipv6
    • ProtocolSubType: notused
    • ProtocolTypeValue: Zero length string
  • ProtocolType: at
    • ProtocolSubType: notused
    • ProtocolTypeValue: Zero length string
  • ProtocolType: ipx
    • ProtocolSubType:
      • ethernetii
      • llc
      • raw
      • snap
    • ProtocolTypeValue: Zero length string
  • ProtocolType: mode-ethernetii
    • ProtocolSubType: etype
    • ProtocolTypeValue: hex string like '600', which means 0x0600. The range is [0x600..0xffff].
  • ProtocolType: mode-llc
    • ProtocolSubType: etype
    • ProtocolTypeValue: the sequence of different parts is as follows: [dsap value;ssap value]. Both range is [0x00..0xff]. For example, if the values of dsap and ssap are 0x09 and 0x0a, the value is '090a'.
  • ProtocolType: mode-snap
    • ProtocolSubType: etype
    • ProtocolTypeValue: hex string like '600', which means 0x0600. The range is [0x600..0xffff].

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.29.1.5

hwL2VlanProtocolVlanNewRowStatus

RowStatus

Read-create

This object identifies the row status.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The entries can be created in this table.

Protocol-based VLANs are divided based on the protocols in packets. After receiving untagged packets through an interface, a device determines the VLANs to which the packets belong according to their protocols before sending them to corresponding VLANs. This feature is used to send the packets of specified protocols within the specified VLAN.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The entries in this table can be read without restraint.

hwL2VlanXlateTable

This table can be used to implement 2:2 VLAN mapping.

The indexes of this table are hwL2VlanXlateInterfaceIndex, hwL2VlanXlateVlanIdBegin, hwL2VlanXlateOuterVlanId, hwL2VlanXlateVlan8021p, and hwL2VlanXlateDirection.

OID

Object Name

Syntax

Maximum Access

Description

Access

1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.1

hwL2VlanXlateInterfaceIndex

InterfaceIndex

Not-accessible

This object indicates the interface index.

Value range: 1 to 65535.

Current

1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.2

hwL2VlanXlateVlanIdBegin

VlanId

Not-accessible

This object indicates the inner VLAN ID before mapping.

Value range: 1 to 4094.

Current

1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.3

hwL2VlanXlateVlanIdEnd

VlanIdOrNone

Read-create

This object indicates the inner VLAN ID after mapping. At present, the value of this object can only be 0.

Current

1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.4

hwL2VlanXlateOuterVlanId

VlanIdOrNone

Not-accessible

This object indicates the outer VLAN ID before mapping.

Value range: 1 to 4094.

Current

1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.5

hwL2VlanXlateVlan8021p

Integer32

Not-accessible

This object indicates the inner priority before mapping.

Current

1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.6

hwL2VlanXlateDirection

Integer32

{

1: inbound(1)

2: outbound(2)

3: both(3)

}

Not-accessible

This object indicates the delivery direction. At present, only "both" is supported.

Current

1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.7

hwL2VlanXlateAction

INTEGER

{

1: map(1)

2: stack(2)

3: pop(3)

}

Read-create

This object indicates an action. Only mapping is supported.

Current

1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.8

hwL2VlanXlateToVlanId

VlanIdOrNone

Read-create

This object indicates the outer VLAN ID after mapping.

The value is an integer that ranges from 0 to 4094. If the value is 0, the new outer VLAN ID is the same as the original one.

Current

1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.9

hwL2VlanXlateToinnerVlanId

VlanIdOrNone

Read-create

This object indicates the inner VLAN ID after mapping.

The value is an integer that ranges from 0 to 4094. If the value is 0, the new inner VLAN ID is the same as the original one.

Current

1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.10

hwL2VlanXlateremark

Integer32

Read-create

This object indicates the priority in the outer VLAN tag.

The value ranges from 0 to 8. The value 8 indicates that no priority is configured.

Current

1.3.6.1.4.1.2011.5.25.42.3.1.2.35.1.11

hwL2VlanXlateRowStatus

RowStatus

Read-create

This object indicates the row status.

Current

Creation Restriction

Entries cannot be created in this table.

If the specified interface is the outbound interface for Layer 2 forwarding, the interface must be a switched interface (Layer 2 interface).

Modification Restriction

The entries in this table can be modified.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwL2VlanProtocolVlanPortNewTable

This table is used to manage protocol-based VLANs on an interface. An interface can correspond to multiple protocols. Different protocols on an interface, therefore, can correspond to different VLANs. Multiple interfaces can correspond to a protocol. Different VLANs can correspond to different protocols.

The indexes of this table are hwL2VlanProtocolVlanPortNewIndex, hwL2VlanProtocolVlanPortNewVlanId, and hwL2VlanProtocolVlanPortNewProtocolIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.1

hwL2VlanProtocolVlanPortNewIndex

Integer32 (1..65535)

not-accessible

This object identifies the index of protocol-based VLAN entries on an interface. The index consists of the interface number and the protocol index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.2

hwL2VlanProtocolVlanPortNewVlanId

Integer32

not-accessible

This object specifies the VLAN ID set in the system view.

The value ranges from 1 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.3

hwL2VlanProtocolVlanPortNewProtocolIndex

Integer32

not-accessible

This object identifies the index of the protocol-based VLAN.

The value ranges from 0 to 15.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.4

hwL2VlanProtocolVlanPortNewPriority

Integer32

read-create

This object specifies the 802.1p priority of the VLAN matching the protocol.

The value ranges from 0 to 7.

The default value is 0.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.31.1.5

hwL2VlanProtocolVlanPortNewRowStatus

RowStatus

read-create

This object identifies the row status.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

The entries can be created in this table.

Modification Restriction

The entries in this table can be modified.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The entries in this table can be read without restraint.

hwL2VlanVoiceVlanPortTable

This table describes the configuration of voice VLAN on an interface.

The index of this table is hwL2VlanVoiceVlanPortIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.1

hwL2VlanVoiceVlanPortIndex

Integer32(1..65535)

Not-accessible

The value of this object identifies the index of an interface enabled with voice VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.2

hwL2VlanVoiceVlanPortEnable

EnabledStatus

Read-write

The value of this object identifies the status of the voice VLAN on an interface.

  • 1: enabled

  • 2: disabled

By default, the voice VLAN on an interface is disabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.3

hwL2VlanVoiceVlanPortMode

INTEGER

{

auto (1),

manual (2)

}

Read-write

The value of this object identifies the mode of adding an interface to the voice VLAN.

  • 1: auto

  • 2: manual

By default, an interface is added to the voice VLAN in manual mode.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.4

hwL2VlanVoiceVlanPortLegacy

EnabledStatus

Read-write

The value of this object identifies the status of the voice VLAN Legacy on an interface.

  • 1: enabled

  • 2: disabled

By default, the voice VLAN Legacy on an interface is disabled.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.5

hwL2VlanVoiceVlanPortSecurityMode

INTEGER

Read-write

The value of this object identifies the working mode of a voice VLAN.

  • 1: security

  • 2: normal

By default, a voice VLAN works in normal mode.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.25.1.6

hwL2VlanVoiceVlanPortModifyPriorityMode

INTEGER

{

modifyPriByVlan (1),

modifyPriByOui (2)

}

read-write

The value of this object identifies the mode for an interface to increase the priority of voice packets.

  • 1: Based on VLANs
  • 2: Based on MAC addresses

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table can be modified.

The value of hwL2VlanVoiceVlanPortEnable can only be 2.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwL2VlanVoiceVlanOuiTable

This table is used to configure OUI addresses that can be identified by global voice VLAN.

The index of this table is hwL2VlanVoiceVlanOuiAddress and hwL2VlanVoiceVlanOuiMask.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.42.3.1.2.26.1.1

hwL2VlanVoiceVlanOuiAddress

MacAddress

Not-accessible

This object indicates a MAC address that can be identified by voice VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.26.1.2

hwL2VlanVoiceVlanOuiMask

MacAddress

Not-accessible

This object indicates the mask of a MAC address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.26.1.3

hwL2VlanVoiceVlanOuiDescription

OCTET STRING (SIZE(0..80))

Read-create

This object indicates the description of an OUI address.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.26.1.4

hwL2VlanVoiceVlanOuiRowStatus

RowStatus

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

You can create entries in this table.

Modification Restriction

The entries in this table can be modified.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwL2VlanSwitchExtTable

This table describes the parameters required for configuring and displaying VLAN Switch. You can determine that the parameters are mandatory or optional as required.

The index of this table is hwL2VlanSwitchExtName.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.1

hwL2VlanSwitchExtName

OCTET STRING (SIZE (1..32))

Not-accessible

This object indicates the name of VLAN Switch.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.2

hwL2VlanSwitchExtSrcIfIndex

InterfaceIndex

Read-create

This object indicates the index of the source interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.3

hwL2VlanSwitchExtOuterVlanId

Integer (0..4094)

Read-create

  • For single-tagged frames, the value of this object is 0.

  • For double-tagged frames, the value of this object identifies the outer VLAN ID.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.4

hwL2VlanSwitchExtVlanListLow

OCTET STRING (SIZE (256))

Read-create

This object indicates a VLAN ID ranging within the lower 2048 bits of the VLAN list.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.5

hwL2VlanSwitchExtVlanListHigh

OCTET STRING (SIZE (256))

Read-create

This object indicates the high 2048 bits of the VLAN list, each of which corresponds to a VLAN ID.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.6

hwL2VlanSwitchExtDstIfIndex

InterfaceIndex

Read-create

This object indicates the index of the destination interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.7

hwL2VlanSwitchExtVlanXlateAction

NTEGER

{

unchange(1),

switch(2),

push(3)

}

Read-create

The value of this object identifies the operation mode of the outer VLAN tag.
  • unchange

    No action is required.

  • switch

    The VLAN tag of frames that are received on the main Ethernet interface is replaced by another VLAN tag.

  • push

    A VLAN tag is added to the VLAN-tagged frames that are received on the main Ethernet interface.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.8

hwL2VlanSwitchExtDstVlan

Integer (0..4094)

Read-create

The value of this object identifies the VLAN ID in the outer VLAN tag.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.12

hwL2VlanSwitchExtLinkStatus

INTEGER

{

up(1),

down(2),

}

Read-only

The value of this object identifies the link status of VLAN Switch.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.33.1.51

hwL2VlanSwitchExtRowStatus

RowStatus

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

To create a row in this table, you must specify hwVlanSwitchExtName.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

To delete a row in this table, you must specify hwVlanSwitchExtName.

Access Restriction

The entries in this table can be read without restriction.

hwL2VlanPolicyVlanNewTable

This table is used to configure policy VLAN.

The indexes of this table are hwL2VlanPolicyVlanNewVlanId, hwL2VlanPolicyVlanNewMac, hwL2VlanPolicyVlanNewIp, and hwL2VlanPolicyVlanNewPort.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.1

hwL2VlanPolicyVlanNewMac

MacAddress

Not-accessible

This object indicates the source MAC address that is the basis of classifying policy VLANs.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.2

hwL2VlanPolicyVlanNewIp

IPAddress

Not-accessible

This object indicates the source IP address that is the basis of classifying policy VLANs.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.3

hwL2VlanPolicyVlanNewPort

Integer32

Not-accessible

This object indicates the source port that is the basis of classifying policy VLANs.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.4

hwL2VlanPolicyVlanNewVlanId

VlanId

Not-accessible

This object indicates the ID of a policy VLAN.

The value ranges from 1 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.5

hwL2VlanPolicyVlanNewVlanPriority

Integer32(0..7)

Read-create

This object indicates the 802.1p priority of the policy VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.30.1.6

hwL2VlanPolicyVlanNewRowStatus

RowStatus

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

You can create entries in this table.

Policy VLANs are classified based on the source MAC addresses and source IP addresses of packets, or based on the source MAC addresses, source IP addresses, and source port numbers of packets.

After receiving untagged packets through a port, a device determines the VLANs to which the packets belong according to source MAC addresses, source IP addresses, and source port numbers of the packets before sending them to corresponding VLANs.

Modification Restriction

The entries in this table can be modified.

Only the 802.1p priority of the policy VLAN can be modified.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The entries in this table can be read without restriction.

hwL2QinQVlanTable

This table is used to configure VLAN stacking and VLAN mapping.

The indexes of this table are hwL2QinQVlanIfIndex, hwL2QinQVlanIdBegin, hwL2QinQVlanIdEnd, hwL2QinQVlanInnerVlanIdBegin, hwL2QinQVlanInnerVlanIdEnd, hwL2QinQVlan8021pBegin, hwL2QinQVlan8021pEnd, and hwL2QinQVlanEtherType.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.1

hwL2QinQVlanIfIndex

InterfaceIndex

Not-accessible

This object indicates an interface index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.2

hwL2QinQVlanIdBegin

VlanId

Not-accessible

This object indicates the start value of the outer VLAN tag before tag replacement. The value ranges from 1 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.3

hwL2QinQVlanIdEnd

VlanId

Not-accessible

This object indicates the end value of the outer VLAN tag before tag replacement. The value ranges from 1 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.4

hwL2QinQVlanInnerVlanIdBegin

VlanIdOrNone

Not-accessible

This object indicates the start value of the inner VLAN tag before tag replacement. The value ranges from 0 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.5

hwL2QinQVlanInnerVlanIdEnd

VlanIdOrNone

Not-accessible

This object indicates the end value of the inner VLAN tag before tag replacement. The value ranges from 0 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.6

hwL2QinQVlan8021pBegin

Integer(0..8)

Not-accessible

This object indicates the start value of the 802.1p priority before tag replacement.

NOTE:

By default, the value of hwL2QinQVlan8021pBegin is 8, indicating that no 802.1p priority is configured.

Currently, the value range of 0 to 7 is supported.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.7

hwL2QinQVlan8021pEnd

Integer(0..8)

Not-accessible

This object indicates the end value of the 802.1p priority before tag replacement.

NOTE:

By default, the value of hwL2QinQVlan8021pEnd is 8, indicating that no 802.1p priority is configured.

Currently, the value range of 0 to 7 is supported.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.8

hwL2QinQVlanEtherType

Integer(0..65535)

Not-accessible

This object indicates the Ethernet type before tag replacement.

The value of hwL2QinQVlan8021pBegin ranges from 1 to 65535.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.9

hwL2QinQVlanMode

INTEGER

{

stacking(1),

mapping(2),

cosstacking(3),

cosmapping(4),

mapping2to1(5),

mapping2to2(6)

}

Read-create

The value of this object identifies the configuration mode of hwL2QinQVlanTable.

  • stacking(1)

    After receiving a tagged frame, an interface adds a tag to the frame according to the carried VLAN ID.

  • mapping(2)

    After receiving a tagged frame, an interface maps the carried tag to a specified tag according to the carried VLAN ID.

  • cosstacking(3)

    After receiving a tagged frame, an interface adds a tag to the frame and maps the inner tag to a specified VLAN ID according to the carried VLAN ID and 802.1p priority.

  • cosmapping(4)

    After receiving a tagged frame, an interface maps the carried tag to a specified tag according to the carried VLAN ID and 802.1p priority.

  • mapping2to1(5)

    After receiving a tagged frame, an interface maps the outer tag to a specified tag and transparently transmits the inner tag.

  • mapping2to2(6)

    After receiving a tagged frame, an interface maps both tags to specified tags.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.10

hwL2QinQVlanChangedVlanId

VlanId

Read-create

This object indicates the VLAN ID in the outer tag after tag replacement. The value ranges from 0 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.11

hwL2QinQVlanChangedInnerVlanId

VlanIdOrNone

Read-create

This object indicates the VLAN ID in the inner tag after tag replacement. The value ranges from 0 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.12

hwL2QinQVlanRemark

Integer(0..8)

Read-create

The value of this object identifies the 802.1p priority after tag replacement.

NOTE:

By default, the value of hwL2QinQVlanRemark is 8, indicating that no 802.1p priority is configured.

Currently, the value range of 0 to 7 is supported.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.13

hwL2QinQVlanMapStackVlanId

VlanIdOrNone

Read-create

This object indicates the VLAN ID in the inner tag after tag replacement. The value ranges from 1 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.14

hwL2QinQVlanRowStatus

RowStatus

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.36.1.15

hwL2QinQVlanInnerRemark

Integer32(0..8)

read-create

The value of this object identifies changed priority in the inner VLAN tag. No change is needed if the value is 8.

NOTE:

By default, the value of hwL2QinQVlanInnerRemark is 8, indicating that no 802.1p priority is configured.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

Common restrictions are as follows:
  • hwL2QinQVlanIfIndex must specify a Layer 2 interface.

  • The value of hwL2QinQVlanIdBegin ranges from 1 to 4094.

  • The value of hwL2QinQVlanIdEnd must be greater than or equal to the value of hwL2QinQVlanIdBegin.

  • The value of hwL2QinQVlanChangedVlanId ranges from 1 to 4094.

Restrictions on VLAN stacking are as follows:
  • hwL2QinQVlanInnerVlanIdBegin

    By default, the value of hwL2QinQVlanInnerVlanIdBegin is 0.

  • hwL2QinQVlanInnerVlanIdEnd

    By default, the value of hwL2QinQVlanInnerVlanIdEnd is 0.

  • hwL2QinQVlan8021pBegin

    By default, the value of hwL2QinQVlan8021pBegin is 8.

  • hwL2QinQVlan8021pEnd

    By default, the value of hwL2QinQVlan8021pEnd is 8.

  • hwL2QinQVlanEtherType

    By default, the value of hwL2QinQVlanEtherType is 0.

  • hwL2QinQVlanMode

    By default, the value of hwL2QinQVlanMode is 1, indicating VLAN stacking.

  • hwL2QinQVlanChangedInnerVlanId

    By default, the value of hwL2QinQVlanChangedInnerVlanId is 0.

Restrictions on VLAN stacking+802.1p are as follows:
  • hwL2QinQVlanInnerVlanIdBegin

    By default, the value of hwL2QinQVlanInnerVlanIdBegin is 0.

  • hwL2QinQVlanInnerVlanIdEnd

    By default, the value of hwL2QinQVlanInnerVlanIdEnd is 0.

  • The valid value of hwL2QinQVlan8021pBegin ranges from 0 to 7.

  • The value of hwL2QinQVlan8021pEnd must be greater than or equal to the value of hwL2QinQVlan8021pBegin.

  • hwL2QinQVlanEtherType

    By default, the value of hwL2QinQVlanEtherType is 0.

  • hwL2QinQVlanMode

    By default, the value of hwL2QinQVlanMode is 3, indicating VLAN stacking+802.1p.

  • hwL2QinQVlanChangedInnerVlanId

    By default, the value of hwL2QinQVlanChangedInnerVlanId is 0.

Restrictions on 1 to 1 VLAN mapping are as follows:
  • hwL2QinQVlanInnerVlanIdBegin

    By default, the value of hwL2QinQVlanInnerVlanIdBegin is 0.

  • hwL2QinQVlanInnerVlanIdEnd

    By default, the value of hwL2QinQVlanInnerVlanIdEnd is 0.

  • hwL2QinQVlan8021pBegin

    By default, the value of hwL2QinQVlan8021pBegin is 8.

  • hwL2QinQVlan8021pEnd

    By default, the value of hwL2QinQVlan8021pEnd is 8.

  • hwL2QinQVlanEtherType

    By default, the value of hwL2QinQVlanEtherType is 0.

  • hwL2QinQVlanMode

    By default, the value of hwL2QinQVlanMode is 2, indicating 1 to 1 VLAN mapping.

  • hwL2QinQVlanChangedInnerVlanId

    By default, the value of hwL2QinQVlanChangedInnerVlanId is 0.

  • hwL2QinQVlanMapStackVlanId

    By default, the value of hwL2QinQVlanMapStackVlanId is 0.

Restrictions on 1 to 1 VLAN mapping+8021p are as follows:
  • hwL2QinQVlanInnerVlanIdBegin

    By default, the value of hwL2QinQVlanInnerVlanIdBegin is 0.

  • hwL2QinQVlanInnerVlanIdEnd

    By default, the value of hwL2QinQVlanInnerVlanIdEnd is 0.

  • The valid value of hwL2QinQVlan8021pBegin ranges from 0 to 7.

  • The value of hwL2QinQVlan8021pEnd must be greater than or equal to the value of hwL2QinQVlan8021pBegin.

  • hwL2QinQVlanEtherType

    By default, the value of hwL2QinQVlanEtherType is 0.

  • hwL2QinQVlanMode is cosmapping(4)

    By default, the value of hwL2QinQVlanMode is 4, indicating 1 to 1 VLAN mapping+802.1p.

  • hwL2QinQVlanChangedInnerVlanId

    By default, the value of hwL2QinQVlanChangedInnerVlanId is 0.

  • hwL2QinQVlanMapStackVlanId

    By default, the value of hwL2QinQVlanMapStackVlanId is 0.

Restrictions on 2 to 1 VLAN mapping are as follows:
  • The value of hwL2QinQVlanInnerVlanIdBegin ranges from 1 to 4094.

  • The value of hwL2QinQVlanInnerVlanIdEnd must be greater than or equal to the value of hwL2QinQVlanInnerVlanIdBegin.

  • hwL2QinQVlan8021pBegin

    By default, the value of hwL2QinQVlan8021pBegin is 8.

  • hwL2QinQVlan8021pEnd

    By default, the value of hwL2QinQVlan8021pEnd is 8.

  • hwL2QinQVlanMode

    By default, the value of hwL2QinQVlanMode is 5, indicating 2 to 1 VLAN mapping.

  • hwL2QinQVlanChangedInnerVlanId

    By default, the value of hwL2QinQVlanChangedInnerVlanId is 0.

  • hwL2QinQVlanMapStackVlanId

    By default, the value of hwL2QinQVlanMapStackVlanId is 0.

Restrictions on 2 to 2 VLAN mapping are as follows:
  • The value of hwL2QinQVlanInnerVlanIdBegin ranges from 1 to 4094.

  • The value of hwL2QinQVlanInnerVlanIdEnd must be greater than or equal to the value of hwL2QinQVlanInnerVlanIdBegin.

  • hwL2QinQVlan8021pBegin

    By default, the value of hwL2QinQVlan8021pBegin is 8.

  • hwL2QinQVlan8021pEnd

    By default, the value of hwL2QinQVlan8021pEnd is 8.

  • hwL2QinQVlanEtherType

    By default, the value of hwL2QinQVlanEtherType is 0.

  • hwL2QinQVlanMode

    By default, the value of hwL2QinQVlanMode is 6, indicating 2 to 2 VLAN mapping.

  • The value of hwL2QinQVlanChangedInnerVlanId ranges from 1 to 4094.

  • hwL2QinQVlanMapStackVlanId

    By default, the value of hwL2QinQVlanMapStackVlanId is 0.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

  • hwL2QinQVlanIfIndex must specify a Layer 2 interface.

  • The value of hwL2QinQVlanIdBegin ranges from 1 to 4094.

  • The value of hwL2QinQVlanIdEnd must be greater than or equal to the value of hwL2QinQVlanIdBegin.

  • The value of hwL2QinQVlanInnerVlanIdBegin ranges from 1 to 4094.

  • The value of hwL2QinQVlanInnerVlanIdEnd must be greater than or equal to the value of hwL2QinQVlanInnerVlanIdBegin.

  • The valid value of hwL2QinQVlan8021pBegin ranges from 0 to 7.

  • The value of hwL2QinQVlan8021pEnd must be greater than or equal to the value of hwL2QinQVlan8021pBegin.

  • The value of hwL2QinQVlanEtherType is 0.

  • Partial deletion is not supported. For example:

    Before deleting a VLAN ID, you must specify hwL2QinQVlanIdBegin and hwL2QinQVlanIdEnd.

Access Restriction

The entries in this table can be read without restriction.

hwL2VlanMultiVoiceVlanPortTable

This table describes the configuration of a voice VLAN on an interface.

The index of this table is hwL2VlanMultiVoiceVlanIfIndex.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1.1

hwL2VlanMultiVoiceVlanIfIndex

InterfaceIndex

Not-accessible

This object indicates the index of an interface enabled with voice VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1.2

hwL2VlanMultiVoiceVlanPortVLanId

VlanId

Read-create

This object indicates the ID of the voice VLAN.

The value ranges from 2 to 4094.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1.3

hwL2VlanMultiVoiceVlanPortUntagEnable

INTEGER

{

enabled (1),

disabled (2)

}

read-write

The value of this object identifies whether untagged voice service packets can be forwarded in a voice VLAN.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1.4

hwL2VlanMultiVoiceVlanPortTag0Enable

INTEGER

{

enabled (1),

disabled (2)

}

read-write

The value of this object identifies whether voice packets carrying VLAN ID 0 can be forwarded in a voice service VLAN.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.5.25.42.3.1.2.32.1.51

hwL2VlanMultiVoiceVlanPortRowStatus

RowStatus

Read-create

This object indicates the row status.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

You can create entries in this table.

Modification Restriction

The entries in this table can be modified without restriction.

Deletion Restriction

The entries in this table can be deleted.

Access Restriction

The entries in this table can be read without restriction.

Description of Alarm Objects

hwVcmpServerMacConflict

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.42.3.1.4.2

hwVcmpServerMacConflict

hwVcmpDeviceMac

This object indicates that multiple servers coexist in the same VCMP domain.

This trap is generated when a VCMP configuration error occurs.

To rectify the fault, configure the devices to ensure that only a single server device exists in the same VCMP domain.

This object is implemented as defined in the corresponding MIB file.

hwVcmpRevisionConflict

OID

Object Name

Bound Variable

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.42.3.1.4.3

hwVcmpRevisionConflict

hwVcmpDeviceMac

After a client sent the server a VCMP request packet due to a restart or a configuration change, the left-most 16 bits in the configuration revision number in a received VCMP packet are the same as that of the local version number, whereas, the right-most 16 bits are greater than the local ones.

After this trap is displayed, VLAN information on the server cannot be sent to the clients in the same VCMP domain.

To rectify the fault, reconfigure the server to ensure that the configurations are complete and correct.

This object is implemented as defined in the corresponding MIB file.

Unsupported Objects

The functions corresponding to the following objects are not supported on the device. Do not use these MIB objects to maintain the device.

Table 70-1  List of unsupported objects

Object ID

Object Name

Table

1.3.6.1.4.1.2011.5.25.42.3.1.2.5

hwL2IsolatemappingTable

table

1.3.6.1.4.1.2011.5.25.42.3.1.2.5.1.1

hwL2IsolatemappingPortNum

hwL2IsolatemappingTable

1.3.6.1.4.1.2011.5.25.42.3.1.2.5.1.2

hwL2IsolateInterflistLow

hwL2IsolatemappingTable

1.3.6.1.4.1.2011.5.25.42.3.1.2.5.1.3

hwL2IsolateInterflistHigh

hwL2IsolatemappingTable

1.3.6.1.4.1.2011.5.25.42.3.1.2.16

hwL2VlanViewMappingTable

table

1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1.1

hwL2VlanViewMappingVlanId

hwL2VlanViewMappingTable

1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1.2

hwL2VlanViewMappingDirection

hwL2VlanViewMappingTable

1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1.3

hwL2VlanViewMappingMapVlanId

hwL2VlanViewMappingTable

1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1.4

hwL2VlanViewMappingPriorityMode

hwL2VlanViewMappingTable

1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1.5

hwL2VlanViewMappingVlan8021p

hwL2VlanViewMappingTable

1.3.6.1.4.1.2011.5.25.42.3.1.2.16.1.6

hwL2VlanViewMappingRowStatus

hwL2VlanViewMappingTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.1

hwL2IfStatVlanCfgTable

table

1.3.6.1.4.1.2011.5.25.42.3.1.3.1.1.1

hwL2IfStatVlanCfgPortIndex

hwL2IfStatVlanCfgTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.1.1.2

hwL2IfStatVlanCfgVlanId

hwL2IfStatVlanCfgTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.1.1.11

hwL2IfStatVlanCfgEnableFlag

hwL2IfStatVlanCfgTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.1.1.12

hwL2IfStatVlanCfgRowStatus

hwL2IfStatVlanCfgTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.2

hwL2IfStat8021pCfgTable

table

1.3.6.1.4.1.2011.5.25.42.3.1.3.2.1.1

hwL2IfStat8021pCfgPortIndex

hwL2IfStat8021pCfgTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.2.1.2

hwL2IfStat8021pCfg8021p

hwL2IfStat8021pCfgTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.2.1.11

hwL2IfStat8021pCfgEnableFlag

hwL2IfStat8021pCfgTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.2.1.12

hwL2IfStat8021pCfgRowStatus

hwL2IfStat8021pCfgTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.3

hwL2IfStat8021pAndVlanCfgTable

table

1.3.6.1.4.1.2011.5.25.42.3.1.3.3.1.1

hwL2IfStat8021pAndVlanCfgPortIndex

hwL2IfStat8021pAndVlanCfgTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.3.1.2

hwL2IfStat8021pAndVlanCfgVlanId

hwL2IfStat8021pAndVlanCfgTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.3.1.3

hwL2IfStat8021pAndVlanCfg8021p

hwL2IfStat8021pAndVlanCfgTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.3.1.11

hwL2IfStat8021pAndVlanCfgEnableFlag

hwL2IfStat8021pAndVlanCfgTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.3.1.12

hwL2IfStat8021pAndVlanCfgRowStatus

hwL2IfStat8021pAndVlanCfgTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.4

hwL2VlanStatTable

table

1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.1

hwL2VlanStatVlanId

hwL2VlanStatTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.2

hwL2VlanStatInTotalPkts

hwL2VlanStatTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.3

hwL2VlanStatInTotalBytes

hwL2VlanStatTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.4

hwL2VlanStatOutTotalPkts

hwL2VlanStatTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.5

hwL2VlanStatOutTotalBytes

hwL2VlanStatTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.6

hwL2VlanStatUnknownUcastDiscardPkts

hwL2VlanStatTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.7

hwL2VlanStatUnknownMcastDiscardPkts

hwL2VlanStatTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.8

hwL2VlanStatBcastDiscardPkts

hwL2VlanStatTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.9

hwL2VlanStatInUcastPkts

hwL2VlanStatTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.10

hwL2VlanStatInUcastBytes

hwL2VlanStatTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.11

hwL2VlanStatOutUcastPkts

hwL2VlanStatTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.12

hwL2VlanStatOutUcastBytes

hwL2VlanStatTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.13

hwL2VlanStatInMcastPkts

hwL2VlanStatTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.14

hwL2VlanStatInMcastBytes

hwL2VlanStatTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.15

hwL2VlanStatOutMcastPkts

hwL2VlanStatTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.16

hwL2VlanStatOutMcastBytes

hwL2VlanStatTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.17

hwL2VlanStatInBcastPkts

hwL2VlanStatTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.18

hwL2VlanStatInBcastBytes

hwL2VlanStatTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.19

hwL2VlanStatOutBcastPkts

hwL2VlanStatTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.20

hwL2VlanStatOutBcastBytes

hwL2VlanStatTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.4.1.21

hwL2VlanStatResetFlag

hwL2VlanStatTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.5

hwL2IfStatVlanTable

table

1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.1

hwL2IfStatVlanPortIndex

hwL2IfStatVlanTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.2

hwL2IfStatVlanId

hwL2IfStatVlanTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.3

hwL2IfStatVlanInTotalPkts

hwL2IfStatVlanTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.4

hwL2IfStatVlanInTotalBytes

hwL2IfStatVlanTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.5

hwL2IfStatVlanOutTotalPkts

hwL2IfStatVlanTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.6

hwL2IfStatVlanOutTotalBytes

hwL2IfStatVlanTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.7

hwL2IfStatVlanInPktsRate

hwL2IfStatVlanTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.8

hwL2IfStatVlanInBytesRate

hwL2IfStatVlanTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.9

hwL2IfStatVlanOutPktsRate

hwL2IfStatVlanTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.10

hwL2IfStatVlanOutBytesRate

hwL2IfStatVlanTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.11

hwL2IfStatVlanInUcastPkts

hwL2IfStatVlanTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.12

hwL2IfStatVlanInUcastBytes

hwL2IfStatVlanTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.13

hwL2IfStatVlanOutUcastPkts

hwL2IfStatVlanTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.14

hwL2IfStatVlanOutUcastBytes

hwL2IfStatVlanTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.15

hwL2IfStatVlanInMcastPkts

hwL2IfStatVlanTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.16

hwL2IfStatVlanInMcastBytes

hwL2IfStatVlanTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.17

hwL2IfStatVlanOutMcastPkts

hwL2IfStatVlanTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.18

hwL2IfStatVlanOutMcastBytes

hwL2IfStatVlanTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.19

hwL2IfStatVlanInBcastPkts

hwL2IfStatVlanTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.20

hwL2IfStatVlanInBcastBytes

hwL2IfStatVlanTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.21

hwL2IfStatVlanOutBcastPkts

hwL2IfStatVlanTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.22

hwL2IfStatVlanOutBcastBytes

hwL2IfStatVlanTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.5.1.23

hwL2IfStatVlanResetFlag

hwL2IfStatVlanTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.6

hwL2IfStat8021pTable

table

1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.1

hwL2IfStat8021pPortIndex hwL2IfStat8021pTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.2

hwL2IfStat8021p hwL2IfStat8021pTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.3

hwL2IfStat8021pInTotalPkts hwL2IfStat8021pTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.4

hwL2IfStat8021pInTotalBytes hwL2IfStat8021pTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.5

hwL2IfStat8021pOutTotalPkts hwL2IfStat8021pTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.6

hwL2IfStat8021pOutTotalBytes hwL2IfStat8021pTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.7

hwL2IfStat8021pInPktsRate hwL2IfStat8021pTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.8

hwL2IfStat8021pInBytsRate hwL2IfStat8021pTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.9

hwL2IfStat8021pOutPktsRate hwL2IfStat8021pTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.10

hwL2IfStat8021pOutBytesRate hwL2IfStat8021pTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.6.1.11

hwL2IfStat8021pResetFlag hwL2IfStat8021pTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.7

hwL2IfStat8021pAndVlanTable

table

1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1.1

hwL2IfStat8021pAndVlanPortIndex hwL2IfStat8021pAndVlanTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1.2

hwL2IfStat8021pAndVlanVlanId hwL2IfStat8021pAndVlanTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1.3

hwL2IfStat8021pAndVlan8021p hwL2IfStat8021pAndVlanTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1.4

hwL2IfStat8021pAndVlanInTotalPkts hwL2IfStat8021pAndVlanTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1.5

hwL2IfStat8021pAndVlanInTotalBytes hwL2IfStat8021pAndVlanTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1.6

hwL2IfStat8021pAndVlanInPktsRate hwL2IfStat8021pAndVlanTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1.7

hwL2IfStat8021pAndVlanInBytsRate hwL2IfStat8021pAndVlanTable

1.3.6.1.4.1.2011.5.25.42.3.1.3.7.1.8

hwL2IfStat8021pAndVlanResetFlag hwL2IfStat8021pAndVlanTable

1.3.6.1.4.1.2011.5.25.42.3.1.4.1

hwL2VlanUnkownPacketAlarm

Alarm Objects

Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178122

Views: 818369

Downloads: 43

Average rating:
This Document Applies to these Products
Related Version
Related Documents
Share
Previous Next