No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
hwAPSpecificRadioTable

hwAPSpecificRadioTable

This table records information about profiles bound to a radio in an AP group, including the 5G radio profile, Mesh profile, WDS profile, location profile, and spectrum profile.

Indexes of this table are hwAPSpApMac and hwAPSpRadio.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.6.139.11.1.9.1.1

hwAPSpRadio

Unsigned32(0–2)

Only the AP4030TN, AP4051TN, and AP8050TN-HD supports three radios.

not-accessible

This object indicates the radio ID. It is the index of the table.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.2

hwAPSp5gRadioProfile

OCTET STRING(1–35)

read-write

This object indicates the bound 5G radio profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.3

hwAPSpMeshProfile

OCTET STRING(1–35)

read-write

This object indicates the bound Mesh profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.4

hwAPSpWdsProfile

OCTET STRING(1–35)

read-write

This object indicates the bound WDS profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.6

hwAPSpLocationProfile

OCTET STRING(1–35)

read-write

This object indicates the bound location profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.8

hwAPSpRadioRowStatus

RowStatus{active(1),notInService(2),notReady(3),createAndGo(4),createAndWait(5),destroy(6)}

read-write

This object indicates the row status. createAndGo(4) and destroy(6) are mainly used.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.9

hwAPSpRadio2gProfile

OCTET STRING(0–35)

read-write

This object indicates the bound 2G radio profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.10

hwAPSpMeshWhitelistProfile

OCTET STRING(0–35)

read-write

This object indicates the bound Mesh whitelist profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.11

hwAPSpWdsWhitelistProfile

OCTET STRING(0–35)

read-write

This object indicates the bound WDS whitelist profile.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.12

hwAPSpRadioSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates the status of the radio switch. The default value is 2.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.13

hwAPSpRadioChannel

Unsigned32

read-write

This object indicates a radio channel.

The 2.4 GHz radio supports 13 channels from channels 1 to 13. The 5 GHz radio supports channels 36-64, 100-140, 149-165, and 184-196, and the value is an integer multiple of 4.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.14

hwAPSpRadioBandwidth

INTEGER{ht20(1),ht40Plus(2),ht40Minus(3)}

read-write

This object indicates a bandwidth. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.15

hwAPSpRadioEirp

Unsigned32(0–30)

read-write

This object indicates the power level. The default value is 0.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.16

hwAPSpRadioAntennaGain

Unsigned32(0xFFFFFFFF|0–30)

read-write

This object indicates antenna gains. The default value 0xFFFFFFFF indicates that the default gain of an AP is used. It is expressed in dB. Default gains vary with different types of APs.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.17

hwAPSpRadioCoverageDistance

Unsigned32(1–400|65535)

read-write

This object indicates the radio coverage distance. The unit is 0.1 km.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.18

hwAPSpRadioWorkMode

INTEGER{normal(1),monitor(2)}

read-write

This object indicates the radio working mode.
  • normal(1): The radio works in normal mode.
  • monitor(2): The radio works in monitor mode.
The default value is normal(1).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.19

hwAPSpRadioFrequency

INTEGER{frequency2G(1),frequency5G(2)}

read-write

This object indicates the setting of the frequency band for radio 0 and radio 2. The default value is invalid.

  • 1: frequency2G
  • 2: frequency5G

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.20

hwAPSpSpectrumAnalysisSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether spectrum analysis is enabled.
  • disable (1): Spectrum analysis is disabled.
  • enable(2): Spectrum analysis is enabled.
The default value is disable(1).

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.21

hwAPSpWidsDeviceDetectSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether device detection is enabled. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.22

hwAPSpWidsAttackDetectEnBmp

Unsigned32

read-write

This object indicates the bitmap of the attack detection function.

  • bit0: weak-iv
  • bit1: spoof
  • bit2: flood
  • bit3: wpa-psk
  • bit4: wpa2-psk
  • bit5: wapi-psk
  • bit6: wep-psk

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.23

hwAPSpWidsRogueContainSwitch

INTEGER{disable(1),enable(2)}

read-write

This object indicates whether rogue device containment is enabled. The default value is 1.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.24

hwAPSpRadioApId

Unsigned32

read-only

AP ID.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.25

hwAPSpRadioSecondChannel

Unsigned32

read-write

This object indicates a second radio-frequency channel. The value can be 42, 58, 106, 122, 138, or 155.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.28

hwAPSpSfnRoamCtsSwitch

INTEGER{disable(1),invalid(255)}

read-write

This object indicates whether RUs are enabled to respond to STAs with CTS packets. The default value is 255.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.29

hwAPSpSfnRoamBeaconSwitch

INTEGER{disable(1),invalid(255)}

read-write

This object indicates whether RUs are enabled to send Beacon frames. The default value is 255.

This object is implemented as defined in the corresponding MIB file.

1.3.6.1.4.1.2011.6.139.11.1.9.1.30

hwAPSpSfnRoamCtsDelay Integer32(0–255)

read-write

This object indicates the delay time after which RUs respond to STAs with CTS packets. It is expressed in milliseconds.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

The prerequisite is that the corresponding AP already exists.

Modification Restriction

Modifications to the entries in this table take effect only when hwAPSpRadioChannel and hwAPSpRadioBandwidth are configured at the same time.

Deletion Restriction

The entries in this table can be deleted without restriction.

Access Restriction

The entries in this table can be read without restriction.

Translation
Download
Updated: 2019-03-29

Document ID: EDOC1000178122

Views: 733828

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next