No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
DISMAN-NSLOOKUP-MIB

DISMAN-NSLOOKUP-MIB

Functions Overview

DISMAN-NSLOOKUP-MIB is the public MIB defined in RFC 2925, and implements NSLOOKUP operation that is a type of distributed management.

The OID of the root object is iso(1).org(3).dod(6).internet(1).mgmt(2).mib-2(1).lookupmib(82).

Relationships Between Tables

Figure 6-1 shows the relationship between tables in DISMAN-NSLOOKUP-MIB.

Figure 6-1  Relationship between tables

Description of Single Objects

lookupMaxConcurrentRequests

OID

Object Name

Syntax

Implemented Specifications

Description

Max Access

1.3.6.1.2.1.82.1.1

lookupMaxConcurrentRequests

Unsigned32

Read-write

The maximum number of concurrent active lookup requests that are allowed within an agent implementation. A value of 0 for this object implies that there is no limit for the number of concurrent active requests in effect.

The limit applies only to new requests being activated. When a new value is set, the agent will continue processing all the requests already active, even if their number exceeds the configured limit.

Value range for the number of test instances that can be configured: 0 to 5000.

lookupPurgeTime

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.82.1.2

lookupPurgeTime

Unsigned32 (0..86400)

Read-write

The amount of time to wait before automatically deleting an entry in the lookupCtlTable and any dependent lookupResultsTable entries after the lookup operation represented by a lookupCtlEntry has been completed. A lookupCtEntry is considered complete when its lookupCtlOperStatus object has a value of completed(3).

A value of 0 indicates that automatic deletion of entries is disabled.

Not supported. The default value is 0.

Description of MIB Tables

lookupCtlTable

This table describes the configuration of the lookup operation.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.82.1.3.1.1

lookupCtlOwnerIndex

SnmpAdminString (SIZE(0..32))

Not-accessible

This object indicates the owner index.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.82.1.3.1.2

lookupCtlOperationName

SnmpAdminString (SIZE(0..32))

Not-accessible

This object indicates the name of a lookup operation.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.82.1.3.1.3

lookupCtlTargetAddressType

InetAddressType

Read-create

This object indicates the type of the destination address. The available options are unknown(0), ipv4(1), and dns(16). Currently, dns(16) is supported only.

Currently, dns(16) is supported only.

1.3.6.1.2.1.82.1.3.1.4

lookupCtlTargetAddress

InetAddress

Read-create

This object indicates the destination address. The value ranges from 1 to 230. The default value is 1.

Only support dns(16)

1.3.6.1.2.1.82.1.3.1.5

lookupCtlOperStatus

INTEGER

  • enabled(1)
  • notStarted(2)
  • completed(3)

Read-only

This object indicates the operational state of an lookupCtlEntry:
  • enabled(1): indicates that operation is active.
  • notStarted(2): indicates that operation has not been started.
  • completed(3): indicates that operation has completed.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.82.1.3.1.6

lookupCtlTime

Unsigned32

Read-only

This object indicates the number of milliseconds that a lookup operation required to be completed at a remote host.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.82.1.3.1.7

lookupCtlRc

Integer32

Read-only

This object indicates the system specific-return code from a lookup operation.

Not supported.

1.3.6.1.2.1.82.1.3.1.8

lookupCtlRowStatus

RowStatus

Read-create

This object indicates the row status. Currently, CreateAndGo(4), Destroy(6), and Active(1) are supported.

This object is implemented as defined in the corresponding MIB files.

Creation Restriction

  • An entry can be created in this table only if the values of lookupCtlOwnerIndex, lookupCtlOperationName, and lookupCtlTargetAddress are set.

  • An entry can be created in this table only if the value of lookupCtlRowStatus is CreateAndGo(4).

Modification Restriction

  • An entry in this table can be modified only if the values of lookupCtlOwnerIndex and lookupCtlOperationName are set.

  • Modifying a single object is supported.

  • An entry in this table can be modified only if the value of lookupCtlRowStatus is active(1).

Deletion Restriction

  • When an entry in this table is deleted, corresponding entries in the Results table are deleted.

  • An entry in this table can be deleted only if the value of lookupCtlRowStatus is Destroy(6).

Access Restriction

  • You can read an entry in this table by either specifying or not specifying the index.

  • You can query an entry only if the value of lookupCtlRowStatus is active(1).

lookupResultsTable

This table stores the results of the operations defined in lookupCtlTable.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.2.1.82.1.4.1.1

lookupResultsIndex

Unsigned32 (1..'ffffffff'h)

Not-accessible

Indicates the index of the operation result. The value ranges from 1 to 4294967295. The default value is 1.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.2.1.82.1.4.1.2

lookupResultsAddressType

InetAddressType

Read-only

Indicates the type of result of a remote lookup operation. A value of unknown(0) implies that either the operation hasn't been started or that it has failed.

Only support for IPv4.

1.3.6.1.2.1.82.1.4.1.3

lookupResultsAddress

InetAddress

Read-only

Reflects a result for a remote lookup operation according to the value of lookupResultsAddressType.

The address type (InetAddressType) that relates to this object is specified by the corresponding value of lookupResultsAddress.

Only support for IPv4.

Creation Restriction

The entries in this table cannot be set.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

  • You can read an entry in this table by either specifying or not specifying the index.

  • If lookupResultsAddressType is unknown, it indicates that the test is not started or the test fails.

Translation
Download
Updated: 2019-10-21

Document ID: EDOC1000178122

Views: 786958

Downloads: 36

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next