No relevant resource is found in the selected language.

This site uses cookies. By continuing to browse the site you are agreeing to our use of cookies. Read our privacy policy>Search

Reminder

To have a better experience, please upgrade your IE browser.

upgrade

S12700 V200R011C10 MIB Reference

This document provides the function overview, relationships between tables, description of single objects, description of MIB tables, and description of alarm objects.
Rate and give feedback:
Huawei uses machine translation combined with human proofreading to translate this document to different languages in order to help you better understand the content of this document. Note: Even the most advanced machine translation cannot match the quality of professional translators. Huawei shall not bear any responsibility for translation accuracy and it is recommended that you refer to the English document (a link for which has been provided).
nqaJitterCollectStatsTable

nqaJitterCollectStatsTable

This table is used to test network status by sending packets. By taking multiple statistics, it calculates the jitter value of network time delay.

The indexes of this table are nqaAdminCtrlOwnerIndex, nqaAdminCtrlTestName, and nqaJitterCollectStatsIndex. Among the three indexes, the former two indexes are external indexes.

OID

Object Name

Syntax

Max Access

Description

Implemented Specifications

1.3.6.1.4.1.2011.5.25.111.8.1.1.1

nqaJitterCollectStatsIndex

Integer32 (1..'7FFFFFFF'h)

Not-accessible

This object indicates the index of this table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.2

nqaJitterCollectStatsCompletions

Counter32

Read-only

This object indicates the number successful jitter tests.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.3

nqaJitterCollectStatsRTDOverThresholds

Counter32

Read-only

This object indicates the number of times when a test instance is successfully performed but exceeds the RTD threshold.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.4

nqaJitterCollectStatsOWDOverThresholdsSD

Counter32

Read-only

This object indicates the number of times when a test instance is successfully performed and the packet delay from the source to destination exceeds the OWD threshold.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.5

nqaJitterCollectStatsOWDOverThresholdsDS

Counter32

Read-only

This object indicates the number of times when a test instance is successfully performed and the packet delay from the destination to source exceeds the OWD threshold.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.6

nqaJitterCollectStatsNumOfRTT

Counter32

Read-only

This object indicates the number of successful jitter tests.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.7

nqaJitterCollectStatsRTTSum

Counter32

Read-only

This object indicates the total RTTs of packets in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.8

nqaJitterCollectStatsRTTSum2Low

Counter32

Read-only

This object indicates the low 32-bit of the RTT square sum.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.9

nqaJitterCollectStatsRTTSum2High

Counter32

Read-only

This object indicates the high 32-bit of the RTT square sum.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.10

nqaJitterCollectStatsRTTMin

Gauge32

Read-only

This object indicates the minimum RTT value of the packets in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.11

nqaJitterCollectStatsRTTMax

Gauge32

Read-only

This object indicates the maximum RTT value of the packets in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.12

nqaJitterCollectStatsMinOfPositivesSD

Gauge32

Read-only

This object indicates the minimum positive jitter value of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.13

nqaJitterCollectStatsMaxOfPositivesSD

Gauge32

Read-only

This object indicates the maximum positive jitter value of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.14

nqaJitterCollectStatsNumOfPositivesSD

Counter32

Read-only

This object indicates the sum of positive jitter values of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.15

nqaJitterCollectStatsSumOfPositivesSD

Counter32

Read-only

This object indicates the total RTTs of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.16

nqaJitterCollectStatsSum2OfPositivesSDLow

Counter32

Read-only

This object indicates the low 32-bit of the square sum of the positive jitter values of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.17

nqaJitterCollectStatsSum2OfPositivesSDHigh

Counter32

Read-only

This object indicates the high 32-bit of the square sum of the positive jitter values of packets sent from the source to destination in a Jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.18

nqaJitterCollectStatsMinOfNegativesSD

Gauge32

Read-only

This object indicates the absolute value of the minimum negative jitter value of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.19

nqaJitterCollectStatsMaxOfNegativesSD

Gauge32

Read-only

This object indicates the absolute value of the maximum negative jitter value of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.20

nqaJitterCollectStatsNumOfNegativesSD

Counter32

Read-only

This object indicates the total negative jitter values of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.21

nqaJitterCollectStatsSumOfNegativesSD

Counter32

Read-only

This object indicates the absolute value sum of the negative jitter values of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.22

nqaJitterCollectStatsSum2OfNegativesSDLow

Counter32

Read-only

This object indicates the low 32-bit of the square sum of the negative jitter values of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.23

nqaJitterCollectStatsSum2OfNegativesSDHigh

Counter32

Read-only

This object indicates the high 32-bit of the square sum of the negative jitter values of packets sent from the source to the destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.24

nqaJitterCollectStatsMinOfPositivesDS

Gauge32

Read-only

This object indicates the minimum positive jitter value of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.25

nqaJitterCollectStatsMaxOfPositivesDS

Gauge32

Read-only

This object indicates the maximum positive jitter value of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.26

nqaJitterCollectStatsNumOfPositivesDS

Counter32

Read-only

This object indicates the number of positive jitter values of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.27

nqaJitterCollectStatsSumOfPositivesDS

Counter32

Read-only

This object indicates the sum of positive jitter values of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.28

nqaJitterCollectStatsSum2OfPositivesDSLow

Counter32

Read-only

This object indicates the low 32-bit of the square sum of the positive jitter values of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.29

nqaJitterCollectStatsSum2OfPositivesDSHigh

Counter32

Read-only

This object indicates the high 32-bit of the square sum of the positive jitter values of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.30

nqaJitterCollectStatsMinOfNegativesDS

Gauge32

Read-only

This object indicates the absolute value of the minimum negative jitter value of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.31

nqaJitterCollectStatsMaxOfNegativesDS

Gauge32

Read-only

This object indicates the absolute value of the maximum negative jitter value of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.32

nqaJitterCollectStatsNumOfNegativesDS

Counter32

Read-only

This object indicates the number of negative jitter values of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.33

nqaJitterCollectStatsSumOfNegativesDS

Counter32

Read-only

This object indicates the absolute value sum of the negative jitter values of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.34

nqaJitterCollectStatsSum2OfNegativesDSLow

Counter32

Read-only

This object indicates the low 32-bit of the square sum of the negative jitter values of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.35

nqaJitterCollectStatsSum2OfNegativesDSHigh

Counter32

Read-only

This object indicates the high 32-bit of the square sum of the negative jitter values of packets sent from the destination to the source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.36

nqaJitterCollectStatsMaxDelaySD

Gauge32

read-only

This object indicates the maximum of all OWD (One Way Delay) from source to destination.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.37

nqaJitterCollectStatsMaxDelayDS

Gauge32

read-only

This object indicates the maximum of all OWD (One Way Delay) from destination to source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.38

nqaJitterCollectStatsNumOfOWD

Counter32

Read-only

This object indicates the number of OWDs in successful tests.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.39

nqaJitterCollectStatsOWSumSD

Counter32

Read-only

This object indicates the total OWDs of the packets from the source to the destination.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.40

nqaJitterCollectStatsOWSumDS

Counter32

Read-only

This object indicates the total OWDs of the packets from the destination to source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.41

nqaJitterCollectStatsPacketLossSD

Counter32

Read-only

This object indicates the number of the packets lost when being sent from the source to destination in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.42

nqaJitterCollectStatsPacketLossDS

Counter32

Read-only

This object indicates the number of the packets lost when being sent from the destination to source in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.43

nqaJitterCollectStatsPacketLossUnknown

Counter32

Read-only

This object indicates the number of packets discarded at an unknown direction in a jitter test .

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.44

nqaJitterCollectStatsPacketOutOfSequences

Counter32

read-only

This object indicates the number of packets arrived out of sequence.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.45

nqaJitterCollectStatsPacketLossRatio

Gauge32

read-only

This object indicates the ratio of the packets lost to all packets sent in the test.

When the value of the nqaJitterCollectStatsSentProbes object is 0, the packet loss rate is 100%.

1.3.6.1.4.1.2011.5.25.111.8.1.1.46

nqaJitterCollectStatsErrors

Counter32

Read-only

This object indicates errors not represented by other objects in this table.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.47

nqaJitterCollectStatsBusies

Counter32

Read-only

This object indicates the number of initialization or resource application failures.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.48

nqaJitterCollectStatsTimeouts

Counter32

Read-only

This object indicates the number of time-out packets in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.49

nqaJitterCollectStatsProbeResponses

Counter32

Read-only

This object indicates the number of data packets to which responses have been received in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.50

nqaJitterCollectStatsSentProbes

Counter32

Read-only

This object indicates the number of data packets sent in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.51

nqaJitterCollectStatsDrops

Counter32

Read-only

This object indicates the number of data packets discarded because of sending failure in a jitter test.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.52

nqaJitterCollectStatsRTTAvg

Gauge32

Read-only

This object indicates the average RTT.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.53

nqaJitterCollectStatsAvgJitter

Gauge32

Read-only

This object indicates the average jitter value.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.54

nqaJitterCollectStatsAvgJitterSD

Gauge32

Read-only

This object indicates the average jitter value from the source to the destination.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.55

nqaJitterCollectStatsAvgJitterDS

Gauge32

Read-only

This object indicates the average jitter value from the destination to source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.56

nqaJitterCollectStatsJitterOut

OCTET STRING

Read-only

This object indicates the jitter (RFC1889) values in sending packets.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.57

nqaJitterCollectStatsJitterIn

OCTET STRING

Read-only

This object indicates the jitter (RFC1889) values in receiving packets.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.58

nqaJitterCollectStatsMinDelaySD

Gauge32

Read-only

The minimum OWD from the source to the destination.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.59

nqaJitterCollectStatsMinDelayDS

Gauge32

Read-only

The minimum OWD from the destination to the source.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.60

nqaJitterCollectStatsAvgDelaySD

Gauge32

Read-only

The average OWD from the source to the destination.

This object is implemented as defined in the corresponding MIB files.

1.3.6.1.4.1.2011.5.25.111.8.1.1.61

nqaJitterCollectStatsAvgDelayDS

Gauge32

Read-only

The average OWD from the destination to the source.

This object is implemented as defined in the corresponding MIB file.

Creation Restriction

No entry can be created in this table.

Modification Restriction

The entries in this table cannot be modified.

Deletion Restriction

The entries in this table cannot be deleted.

Access Restriction

The entries in this table can be read without restriction.

Translation
Download
Updated: 2019-03-29

Document ID: EDOC1000178122

Views: 686323

Downloads: 34

Average rating:
This Document Applies to these Products
Related Documents
Related Version
Share
Previous Next